//-------------------------------------------------------------------------------
//                      T E X T U R E   P R O C E S S E S
//                       f o r   C D P  R E L E A S E  8 
//-------------------------------------------------------------------------------

//Legacy version: requires older Rel7.1 texture
[124],5,17,1,texture,simple,Texture of events from one or more sounds
1,Single harmonic field,Create a texture using a pitch set duplicated in all 8ves
1,2,3,4,5,6,7,8,9,10,11,12,13,-14,-15,-16,-17,-31
2,Changing hmc fields,Create a texture using changing hmc fields
1,2,3,4,5,6,7,8,9,10,11,12,13,-14,-15,-16,-17,-31
3,Single harmonic set,Create a texture using the pitches specified
1,2,3,4,5,6,7,8,9,10,11,12,13,-14,-15,-16,-17,-31
4,Changing hmc sets,Create a texture using changing hmc sets
1,2,3,4,5,6,7,8,9,10,11,12,13,-14,-15,-16,-17,-31
5,None,Create a texture using no specified pitches
1,2,3,4,5,6,7,8,9,10,11,12,13,-14,-15,-16,-17,-31
notedata,datafile
NOTEDATA: Infofile, insnd 'pitches',harmonic fields pitches etc.
1,4,0,0,0,0,0,0,0,0,0,0
out dur,secs
OUT DUR: Minimum duration of output sound
1,0,1,1,12000,1,1,2,0.01,150,300,10
packing, secs
PACKING: average time between event onsets (secs) T-V
1,1,2,-10000,6000,1,1,3,0.001,1,60,0.25
scatter,value
SCATTER: randomisation of event onsets (0 - 10) T-V
1,1,1,0,1000,0,1,2,0,5,10,0
timegrid,msecs
TIMEGRID: minimum step (msecs) in quantised timegrid.  Default: 0
1,1,1,0,1000,0,0,0,0,500,1000,0
Firstsnd,number
FIRSTSND: First sound to use, of infile sounds (1-no.of sounds; must be <=Last sound) T-V
1,1,1,1,16,1,0,0,1,8,16,1
Lastsnd,number
LASTSND: Last sound to use, of infile sounds (1-no.of sounds; must be >=First sound) T-V
1,1,1,1,16,1,0,0,1,8,16,1
min gain,MIDI
MIN GAIN: Minimum level of input events - in MIDI values (1-127: default 64) T-V
1,1,1,1,127,64,1,2,1,64,127,64
max gain,MIDI
MAX GAIN: Maximum level of input events - in MIDI values (1-127: default 64) T-V
1,1,1,1,127,64,1,2,1,64,127,64
min dur,secs
MIN DUR: Minimum duration of events in texture (< Max dur; 0.016-32767) T-V
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
max dur,secs
MAX DUR: Maximum duration of events in texture (> Min dur; 0.016-32767) T-V
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
min pitch,MIDI
MIN PITCH: Minimum pitch (MIDI: 1-127, Mid-C=60, fractions allowed; <= MAX PITCH) T-V
1,1,1,100,12700,6000,1,2,1,64,127,60
max pitch,MIDI
MAX PITCH: Maximum pitch (MIDI: 1-127, Mid-C=60, fractions allowed; >= MIN PITCH) T-V
1,1,1,100,12700,6000,1,2,1,64,127,60
-aatten, <1
ATTEN: Overall attenuation of the output (0.00002-1). May be needed to avoid overflow 
0,1,1,1,1000,500,1,4,0.001,0.5,1,0.5
-pposition,0-1
POSITION: Central pan position of output sound (0 Left -  1 Right; default 0.5) - see SPREAD
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-sspread,0-1
SPREAD: Spatial spread of texture events (0 Central-position only - 1 Full-spread)
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-rseed,number
SEED: Same seed-no produces same output on re-run(default 0: differs each time)
0,0,1,0,1000,0,0,0,0,500,1000,0
-w,whole input
OPTION: Always play whole input-sound (ignoring duration values)

[1241],5,18,3,texmchan,texmchan,Texture Simple: M-Ch vn (M-C out)
1,Single harmonic field,Create a texture using a pitch set duplicated in all 8ves
1,2,3,4,5,6,7,8,9,10,11,12,13,18,-14,-15,-16,-17,-31,-32,-33
2,Changing hmc fields,Create a texture using changing hmc fields
1,2,3,4,5,6,7,8,9,10,11,12,13,18,-14,-15,-16,-17,-31,-32,-33
3,Single harmonic set,Create a texture using the pitches specified
1,2,3,4,5,6,7,8,9,10,11,12,13,18,-14,-15,-16,-17,-31,-32,-33
4,Changing hmc sets,Create a texture using changing hmc sets
1,2,3,4,5,6,7,8,9,10,11,12,13,18,-14,-15,-16,-17,-31,-32,-33
5,None,Create a texture using no specified pitches
1,2,3,4,5,6,7,8,9,10,11,12,13,18,-14,-15,-16,-17,-31,-32,-33
notedata,datafile
NOTEDATA: Infofile, insnd 'pitches',harmonic fields pitches etc.
1,4,0,0,0,0,0,0,0,0,0,0
outlength,secs
OUTLENGTH: Minimum duration of output soundfile
1,0,1,1,12000,1,1,2,0.01,150,300,10
packing, secs
PACKING: average time between event onsets
1,1,2,-10000,6000,1,1,3,0.001,1,60,0.25
scatter,value
SCATTER: randomisation of event-onsets (0 - 10)
1,1,1,0,1000,0,1,2,0,5,10,0
timegrid,msecs
TIMEGRID: minimum step(Msecs) in quantised timegrid (for group start-times) Default 0
1,1,1,0,1000,0,0,0,0,500,1000,0
Firstsnd,number
FIRSTSND: First sound to use, of infile sounds (1-no.of sounds; must be <=Last sound)
1,1,1,1,16,1,0,0,1,8,16,1
Lastsnd,number
LASTSND: Last sound to use, of infile sounds (1-no.of sounds; must be >=First sound)
1,1,1,1,16,1,0,0,1,8,16,1
min gain,MIDI
MIN GAIN: Minimum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
max gain,MIDI
MAX GAIN: Maximum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
min dur,secs
MIN DUR: Minimum duration of events in texture (< Max dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
max dur,secs
MAX DUR: Maximum duration of events in texture (> Min dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
min pitch,MIDI
MIN PITCH: Minimum pitch - <Max pitch (MIDI VALUE 0-127, Mid-C=60, fractions allowed)
1,1,1,0,12700,6000,1,2,0,64,127,60
max pitch,MIDI
MAX PITCH: Maximum pitch - >Min pitch (MIDI VALUE 0-127, Mid-C=60, fractions allowed)
1,1,1,0,12700,6000,1,2,0,64,127,60
-aatten, <1
ATTEN: Overall attenuation of the output (0.00002-1). May be needed to avoid overflow 
0,1,1,1,1000,500,1,4,0.001,0.5,1,0.5
-pposition,0-16
POSITION: Central pan position of output sound (chans 0 -  16; default 0) - see SPREAD
0,1,1,0,1600,0,1,2,0,8,16,0
-sspread,0-1
SPREAD: Spatial spread of texture events (chans 0-16)
0,1,1,0,1600,400,1,2,0,8,16,4
-rseed,number
SEED: Same seed-no produces same output on re-run(default 0: differs each time)
0,0,1,0,1000,0,0,0,0,500,1000,0
outchans,number
OUTCHANS: (m-ch only) number of output channels (2-16)
1,0,1,2,16,4,0,0,2,8,16,4
-w,whole input
OPTION: Always play whole input-sound (ignoring duration values)
-c,Cyclical files
OPTION: Cycle round files in listed order ignoring FIRSTSND and LASTSND
-p,Random permutation
OPTION: If 'cyclical' option also chosen, randomly permutate each cycle

[1242],3,18,2,newtex,newtex,Create a texture of grains with aspects of drunken walk
1,Single source,Transpositions spread over MAXRANGE 8ves and spatially; fade in-out randomly.
1,2,3,4,6,7,-12,-13,-14,-15,-16,-17,-18,-31,-32
2,Multi-source,Sources are read at orig. rate and spread spatially; fade in-out randomly.
2,3,5,6,7,8,-12,-13,-14,-15,-16,-17,-18,-31,-32
3,Drunken walk, Source(s) are read as drunken walks and spread spatially; fade in-out randomly.
2,3,5,6,7,9,10,11,-12,-13,-14,-15,-16,-17,-18,-31,-32
transposes,datafile
TRANSPOSES: Lines of TIME TR1 L1 [TR2 L2 ...]; TR = transposition ratio and L = level.
1,4,0,0,0,0,0,0,0,0,0,0
outdur,secs
OUTDUR: Duration of output sound (0-32767 secs) 
1,0,1,1,12000,1,1,2,0.01,150,300,10
outchans,number
OUTCHANS: number of output channels (2-16)
1,0,1,2,16,4,0,0,2,8,16,4
maxrange,8ves
MAXRANGE: Range of transpositions of input (octaves: 1-8).
1,0,1,1,80,1,1,2,1.0,4,8.0,1.0
simult,number
SIMULT: Number of simultaneous soundings of any source (1-8).
1,0,1,1,8,1,0,0,1,4,8,1
step,secs
STEP: Average time between changes to stream-content of output (secs: 0.004 to 100; < 1/2 OUTDUR)
1,1,1,1,1000,5,1,2,0.01,50,100,0.05
spacetype,number
SPACETYPE: Type of output spatialisation (0=random; others only if OUTCHANS=8)
1,0,1,0,14,0,0,0,0,7,14,0
delay,secs
DELAY: Time delay between identical components (0-32767)
1,0,1,0,6000,0,1,2,0,30,60,0
starttime,secs
START-TIME ('locus'): time when drunken walk occurs (T-V)
1,1,3,0,1000,0,1,2,0,0,0,0
timerange,+/- secs
TIMERANGE ('ambitus'): time-range within which segments are read (secs T-V) 
1,1,3,0,1000,0,1,2,0,0,0,0.002
drunkstep,secs
DRUNKSTEP: Maximum size of random step between segment reads. (min. 0.002 secs)
1,1,3,2,1000,2,1,2,0.002,0,0,0.002
-ssplice,msecs
SPLICE: Splice-lengths for component entry and exit (2-50 msecs; default: 5)
0,0,1,2,50,5,0,0,2,25,50,5
-ncomponents,number
COMPONENTS: Number of components chosen for each event (0-32 Mode1; 0-132 Mode 2-3)
0,0,1,0,100,1,0,0,0,50,100,1
-rrotation,hertz
ROTATION: Rotation speed (+/- 20 Hz.)
0,0,1,-2000,2000,0,1,2,-20,10,20,0
-efrom chan,channel
FROM CHAN: Sound emerges from this channel-number at start, over "from time" (0 to no. of chans.; max 16)
0,0,1,0,16,1,0,0,0,8,16,1
-Efrom time,secs
FROM TIME: Sound emerges over this time, from the given channel "from chan" (secs)
0,0,3,0,1000,0,1,2,0,0,0,0
-cto chan,channel
TO CHAN: Sound converges to this channel-number at end, over "to time" (0 to no. of chans.; max 16)
0,0,1,0,16,1,0,0,0,8,16,1
-Cto time,secs
TO TIME: Sound converges over this time, to the given channel "to chan" (secs)
0,0,3,0,1000,0,1,2,0,0,0,0
-x,Exclusive
OPTION: Exclusive - change all components as far as possible from event to event.
-j,Jump 
OPTION: Jump - all components are assigned to the same location for any one event.

//Simple Rel.8 vn.
[1243],5,18,3,texture,simple,Texture of events from one or more sounds
1,Single harmonic field,Create a texture using a pitch set duplicated in all 8ves
1,2,3,4,5,6,7,8,9,10,11,12,13,14,-15,-16,-17,-18,-31,-32,-33
2,Changing hmc fields,Create a texture using changing hmc fields
1,2,3,4,5,6,7,8,9,10,11,12,13,14,-15,-16,-17,-18,-31,-32,-33
3,Single harmonic set,Create a texture using the pitches specified
1,2,3,4,5,6,7,8,9,10,11,12,13,14,-15,-16,-17,-18,-31,-32,-33
4,Changing hmc sets,Create a texture using changing hmc sets
1,2,3,4,5,6,7,8,9,10,11,12,13,14,-15,-16,-17,-18,-31,-32,-33
5,None,Create a texture using no specified pitches
1,2,3,4,5,6,7,8,9,10,11,12,13,14,-15,-16,-17,-18,-31,-32,-33
notedata,datafile
NOTEDATA: Infofile, insnd 'pitches',harmonic fields pitches etc.
1,4,0,0,0,0,0,0,0,0,0,0
out dur,secs
OUT DUR: Minimum duration of output sound
1,0,1,1,12000,1,1,2,0.01,150,300,10
packing, secs
PACKING: average time between event onsets (secs) T-V
1,1,2,-10000,6000,1,1,3,0.001,1,60,0.25
scatter,value
SCATTER: randomisation of event onsets (0 - 10) T-V
1,1,1,0,1000,0,1,2,0,5,10,0
timegrid,msecs
TIMEGRID: minimum step (msecs) in quantised timegrid. (0-10k; default: 0
1,1,1,0,10000,0,0,0,0,5000,10000,0
Firstsnd,number
FIRSTSND: First sound to use, of infile sounds (1-no.of sounds; must be <=Last sound) T-V
1,1,1,1,16,1,0,0,1,8,16,1
Lastsnd,number
LASTSND: Last sound to use, of infile sounds (1-no.of sounds; must be >=First sound) T-V
1,1,1,1,16,1,0,0,1,8,16,1
min gain,MIDI
MIN GAIN: Minimum level of input events - in MIDI values (1-127: default 64) T-V
1,1,1,1,127,64,1,2,1,64,127,64
max gain,MIDI
MAX GAIN: Maximum level of input events - in MIDI values (1-127: default 64) T-V
1,1,1,1,127,64,1,2,1,64,127,64
min dur,secs
MIN DUR: Minimum duration of events in texture (< Max dur; 0.016-32767) T-V
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
max dur,secs
MAX DUR: Maximum duration of events in texture (> Min dur; 0.016-32767) T-V
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
min pitch,MIDI
MIN PITCH: Minimum pitch (MIDI: 1-127, Mid-C=60, fractions allowed; <= MAX PITCH) T-V
1,1,1,100,12700,6000,1,2,1,64,127,60
max pitch,MIDI
MAX PITCH: Maximum pitch (MIDI: 1-127, Mid-C=60, fractions allowed; >= MIN PITCH) T-V
1,1,1,100,12700,6000,1,2,1,64,127,60
omit,number
OMIT: 1 in OMIT events are silent: fewer silent events as value increases (0-64; 0 or 64: no events silent) 
1,1,1,0,64,0,0,0,0,32,64,0
-aatten, <1
ATTEN: Overall attenuation of the output (0.00002-1). May be needed to avoid overflow 
0,1,1,1,1000,500,1,4,0.001,0.5,1,0.5
-pposition,0-1
POSITION: Central pan position of output sound (0 Left -  1 Right; default 0.5) - see SPREAD
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-sspread,0-1
SPREAD: Spatial spread of texture events (0 Central-position only - 1 Full-spread)
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-rseed,number
SEED: Same seed-no produces same output on re-run(default 0: differs each time)
0,0,1,0,1000,0,0,0,0,500,1000,0
-w,Whole input
OPTION: Always play whole input-sound (ignoring duration values)
-c,Choose sounds cyclically
OPTION: Choose soundfiles cyclically in listed order: ignore firtsnd, lastsnd
-p,Permutate each cycle               
OPTION: Randomly permutate each cycle (only if cyclical option set)

[125],5,28,3,texture,grouped,Texture of event groups with random pitch-shapes
1,Single harmonic field,Create a texture using a pitch set duplicated in all 8ves
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,-25,-26,-27,-28,-31,-32,-33
2,Changing hmc fields,Create a texture using changing hmc fields
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,-25,-26,-27,-28,-31,-32,-33
3,Single harmonic set,Create a texture using the pitches specified
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,-25,-26,-27,-28,-31,-32,-33
4,Changing hmc sets,Create a texture using changing hmc sets
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,-25,-26,-27,-28,-31,-32,-33
5,None,Create a texture using no specified pitches
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,-25,-26,-27,-28,-31,-32,-33
notedata,datafile
NOTEDATA: Infofile, insnd 'pitches',harmonic fields pitches etc.
1,4,0,0,0,0,0,0,0,0,0,0
outlength,secs
OUTLENGTH: Minimum duration of output soundfile
1,0,1,1,12000,1,1,2,0.01,150,300,10
packing, secs
PACKING: average time between event onsets
1,1,2,-10000,6000,1,1,3,0.001,1,60,0.25
scatter,value
SCATTER: randomisation of event-onsets (0 - 10)
1,1,1,0,1000,0,1,2,0,5,10,0
timegrid,msecs
TIMEGRID: minimum step(Msecs) in quantised timegrid (for group start-times) Default 0
1,1,1,0,1000,0,0,0,0,500,1000,0
firstsnd,number
FIRSTSND: First sound to use, of infile sounds (1-no.of sounds; must be <=Last sound)
1,1,1,1,16,1,0,0,1,8,16,1
lastsnd,number
LASTSND: Last sound to use, of infile sounds (1-no.of sounds; must be >=First sound)
1,1,1,1,16,1,0,0,1,8,16,1
min gain,MIDI
MIN GAIN: Minimum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
max gain,MIDI
MAX GAIN: Maximum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
min dur,secs
MIN DUR: Minimum duration of events in texture (< Max dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
max dur,secs
MAX DUR: Maximum duration of events in texture (> Min dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
min pitch,MIDI
MIN PITCH: Minimum pitch - <Max pitch (MIDI VALUE 0-127, Mid-C=60, fractions allowed)
1,1,1,0,12700,6000,1,2,0,64,127,60
max pitch,MIDI
MAX PITCH: Maximum pitch - >Min pitch (MIDI VALUE 0-127, Mid-C=60, fractions allowed)
1,1,1,0,12700,6000,1,2,0,64,127,60
phgrid,msecs
PHGRID: a timegrid (msecs) applying WITHIN the groups
1,1,1,0,1000,0,0,0,0,500,1000,0
group space,0-5
GROUP SPACE: Pan event-groups: 0=Nochange;1=Scattered(deflt);2/3=decor to/from event;4/5=decor L-R/R-L 
1,1,1,0,5,0,0,0,0,2,5,0
gpspacerange,  value
GRPSPACERANGE: Spatial range of event-groups (Range 0-1: default 1)
1,1,1,0,1000,1000,1,2,0,0.5,1,1
amp rise,MIDI
AMP RISE: Amplitude change within groups: (0-127: default 0)
1,1,1,0,12700,0,1,2,0,64,127,0
contour,0-6    
CONTOUR: Amplitude contour of gps:1=cresc;2=flat;3=decresc;4=1or2;5=1or3;6=2or3;0=mixture(deflt) 
1,1,1,0,6,0,0,0,0,3,6,0
Gpsize low,number
GPSIZE LOW: Smallest no. of events in groups (1-32767; not>Gpsize-high)
1,1,1,1,1000,1,0,0,1,500,1000,1
Gpsize high,number
GPSIZE HIGH: Largest no. of events in groups (1-32767; not<Gpsize-low)
1,1,1,1,1000,1,0,0,1,500,1000,1
gppack low,msecs
GPPACK LOW: Shortest time between event-onsets in groups(Range: 0.022676 to 60000 msecs)
1,1,1,1,6000,25,0,0,1,3000,6000,25
gppack high,msecs
GPPACK HIGH: Longest time between event-onsets in groups (Range: 0.022676 to 60000 msecs)
1,1,1,1,6000,50,0,0,1,3000,6000,50
gprange low,number
GPRANGE LOW: Min. pitch-range of groups: number of notes in range
1,1,1,1,100,1,0,0,1,50,100,1
gprange high,number
GPRANGE HIGH: Max. pitch-range of groups: number of notes in range
1,1,1,1,100,1,0,0,1,50,100,1
-aatten, <1
ATTEN: Overall attenuation of the output (0.00002-1). May be needed to avoid overflow 
0,1,1,1,1000,500,1,4,0.001,0.5,1,0.5
-pposition,0-1
POSITION: Central pan position of output sound (0 Left -  1 Right; default 0.5) - see SPREAD
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-sspread,0-1
SPREAD: Spatial spread of texture events (0 Central-position only - 1 Full-spread)
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-rseed,number
SEED: Same seed-no produces same output on re-run(default 0: differs each time)
0,0,1,0,1000,0,0,0,0,500,1000,0
-w,Whole input
OPTION: Always play whole input-sound (ignoring duration values)
-d,Fixed timestep
OPTION: Fixed timestep between groupnotes
-i,Not fixed instr.
OPTION: Each group NOT confined to a fixed instrument (default: fixed)

[126],5,25,6,texture,decorated,Texture with decorations(random note-order)
1,Single harmonic field,Create a texture using a pitch set duplicated in all 8ves
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,-22,-23,-24,-25,-31,-32,-33,-34,-35,-36
2,Changing hmc fields,Create a texture using changing hmc fields
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,-22,-23,-24,-25,-31,-32,-33,-34,-35,-36
3,Single harmonic set,Create a texture using the pitches specified
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,-22,-23,-24,-25,-31,-32,-33,-34,-35,-36
4,Changing hmc sets,Create a texture using changing hmc sets
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,-22,-23,-24,-25,-31,-32,-33,-34,-35,-36
5,None,Create a texture using no specified pitches
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,-22,-23,-24,-25,-31,-32,-33,-34,-35,-36
notedata,datafile
NOTEDATA: Infofile, insnd 'pitches',harmonic fields pitches etc.
1,4,0,0,0,0,0,0,0,0,0,0
out dur,secs
OUT DUR: Minimum duration of outfile
1,0,1,1,12000,1,1,2,0.01,150,300,10
skip time,secs
SKIP TIME: Time between repeats of motif-to-decorate in notedata (between runs of 'line' substructure notelist)
1,0,2,-10000,10000,0,1,2,0.001,1,100,1
firstsnd,number
FIRSTSND: First sound to use, of infile sounds (1-no.of sounds; must be <=Last sound)
1,1,1,1,16,1,0,0,1,8,16,1
lastsnd,number
LASTSND: Last sound to use, of infile sounds (1-no.of sounds; must be >=First sound)
1,1,1,1,16,1,0,0,1,8,16,1
min gain,MIDI
MIN GAIN: Minimum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
max gain,MIDI
MAX GAIN: Maximum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
min dur,secs
MIN DUR: Minimum duration of events in texture (< Max dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
max dur,secs
MAX DUR: Maximum duration of events in texture (> Min dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
phgrid,msecs
PHGRID: a timegrid (MSecs) applying WITHIN the groups
1,1,1,0,1000,0,0,0,0,500,1000,0
group space,0-5
GROUP SPACE: Pan event-groups:0=Nochange;1=Scattered(deflt);2/3=decor to/from event;4/5=decor L-R/R-L 
1,1,1,0,5,0,0,0,0,2,5,0
gpspacerange,  value
GRPSPACERANGE: Spatial range of event-groups (Range 0-1: default 1)
1,1,1,0,1000,1000,1,2,0,0.5,1,1
amp rise,MIDI
AMP RISE: Amplitude change within groups: (0-127: default 0)
1,1,1,0,12700,0,1,2,0,64,127,0
contour,0-6    
CONTOUR: Amplitude contour of gps: 1=cresc; 2=flat; 3=decresc; 4=1or2; 5=1or3; 6=2or3; 0=mixture(deflt) 
1,1,1,0,6,0,0,0,0,3,6,0
gpsize low,number
GPSIZE LOW: Smallest no. of events in groups (1-32767; not>Gpsize_high)
1,1,1,1,1000,1,0,0,1,500,1000,1
gpsize high,number
GPSIZE HIGH: Largest no. of events in groups (1-32767; not<Gpsize-low)
1,1,1,1,1000,1,0,0,1,500,1000,1
gppack low,msecs
GPPACK LOW: Shortest time between event-onsets in groups (0.023 to 60000 msecs)
1,1,1,1,6000,1,0,0,1,3000,6000,1
gppack high,msecs
GPPACK HIGH: Longest time between event-onsets in groups (0.023 to 60000 msecs)
1,1,1,1,6000,1,0,0,1,3000,6000,1
gprange low,number
GPRANGE LOW: Min. pitch-range of groups: number of notes in range
1,1,1,1,100,1,0,0,1,50,100,1
gprange high,number
GPRANGE HIGH: Max. pitch-range of groups: number of notes in range
1,1,1,1,100,1,0,0,1,50,100,1
centring,0-6
CENTRING: 0:Decor pitches CENTRED on line pitches(deflt); 1:ABOVE; 2:BELOW; 3:C+A; 4:C+B; 5:A+B; 6:C+A+B 
1,1,1,0,6,0,0,0,0,3,6,0
-aatten, <1
ATTEN: Overall attenuation of the output (0.00002-1). May be needed to avoid overflow 
0,1,1,1,1000,500,1,4,0.001,0.5,1,0.5
-pposition,0-1
POSITION: Central pan position of output sound (0 Left -  1 Right; default 0.5) - see SPREAD
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-sspread,0-1
SPREAD: Spatial spread of texture events (0 Central-position only - 1 Full-spread)
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-rseed,number
SEED: Same seed-no produces same output on re-run(default 0: differs each time)
0,0,1,0,1000,0,0,0,0,500,1000,0
-w,Whole input
OPTION: Always play whole input-sound (ignoring duration values)
-d,Fixed timestep
OPTION: Fixed timestep between group notes
-i,Not fixed instr.
OPTION: Each group NOT confined to a fixed instrument (default: fixed)
-h,Decorate topnote chord
OPTION: Decorate TOP-note of any chord (default: first note listed)
-e,Dec all notes of chds
OPTION: Decorate all notes of chords
-k,Discard orig line
OPTION: Discard original line after decoration

[127],5,25,6,texture,predecor,Texture with decorations(random note-order)
1,Single harmonic field,Create a texture using a pitch set duplicated in all 8ves
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,-22,-23,-24,-25,-31,-32,-33,-34,-35,-36
2,Changing hmc fields,Create a texture using changing hmc fields
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,-22,-23,-24,-25,-31,-32,-33,-34,-35,-36
3,Single harmonic set,Create a texture using the pitches specified
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,-22,-23,-24,-25,-31,-32,-33,-34,-35,-36
4,Changing hmc sets,Create a texture using changing hmc sets
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,-22,-23,-24,-25,-31,-32,-33,-34,-35,-36
5,None,Create a texture using no specified pitches
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,-22,-23,-24,-25,-31,-32,-33,-34,-35,-36
notedata,datafile
NOTEDATA: Infofile, insnd 'pitches',harmonic fields pitches etc.
1,4,0,0,0,0,0,0,0,0,0,0
out dur,secs
OUT DUR: Minimum duration of outfile
1,0,1,1,12000,1,1,2,0.01,150,300,10
skip time,secs
SKIP TIME: Time between repeats of motif-to-decorate in notedata (between runs of 'line' substructure notelist)
1,0,2,-10000,10000,0,1,2,0.001,1,100,1
firstsnd,number
FIRSTSND: First sound to use, of infile sounds (1-no.of sounds; must be <=Last sound)
1,1,1,1,16,1,0,0,1,8,16,1
lastsnd,number
LASTSND: Last sound to use, of infile sounds (1-no.of sounds; must be >=First sound)
1,1,1,1,16,1,0,0,1,8,16,1
min gain,MIDI
MIN GAIN: Minimum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
max gain,MIDI
MAX GAIN: Maximum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
min dur,secs
MIN DUR: Minimum duration of events in texture (< Max dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
max dur,secs
MAX DUR: Maximum duration of events in texture (> Min dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
phgrid,msecs
PHGRID: a timegrid (MSecs) applying WITHIN the groups
1,1,1,0,1000,0,0,0,0,500,1000,0
group space,0-5
GROUP SPACE: Pan event-groups:0=Nochange;1=Scattered(deflt);2/3=decor to/from event;4/5=decor L-R/R-L 
1,1,1,0,5,0,0,0,0,2,5,0
gpspacerange,  value
GRPSPACERANGE: Spatial range of event-groups (Range 0-1: default 1)
1,1,1,0,1000,1000,1,2,0,0.5,1,1
amp rise,MIDI
AMP RISE: Amplitude change within groups: (0-127: default 0)
1,1,1,0,12700,0,1,2,0,64,127,0
contour,0-6    
CONTOUR: Amplitude contour of gps: 1=cresc; 2=flat; 3=decresc; 4=1or2; 5=1or3; 6=2or3; 0=mixture(deflt) 
1,1,1,0,6,0,0,0,0,3,6,0
Gpsize low,number
GPSIZE LOW: Smallest no. of events in groups (1-32767;not>Gpsize_high)
1,1,1,1,1000,1,0,0,1,500,1000,1
Gpsize high,number
GPSIZE HIGH: Largest no. of events in groups (1-32767;not<Gpsize-low)
1,1,1,1,1000,1,0,0,1,500,1000,1
gppack low,msecs
GPPACK LOW: Shortest time between event-onsets in groups (0.023 to 60000 msecs)
1,1,1,1,6000,1,0,0,1,3000,6000,1
gppack high,msecs
GPPACK HIGH: Longest time between event-onsets in groups (0.023 to 60000 msecs)
1,1,1,1,6000,1,0,0,1,3000,6000,1
gprange low,number
GPRANGE LOW: Min. pitch-range of groups: number of notes in range
1,1,1,1,100,1,0,0,1,50,100,1
gprange high,number
GPRANGE HIGH: Max. pitch-range of groups: number of notes in range
1,1,1,1,100,1,0,0,1,50,100,1
centring,0-6
CENTRING: 0:Decor pitches CENTRED on line pitches(deflt); 1:ABOVE; 2:BELOW; 3:C+A; 4:C+B; 5:A+B; 6:C+A+B 
1,1,1,0,6,0,0,0,0,3,6,0
-aatten, <1
ATTEN: Overall attenuation of the output (0.00002-1). May be needed to avoid overflow 
0,1,1,1,1000,500,1,4,0.001,0.5,1,0.5
-pposition,0-1
POSITION: Central pan position of output sound (0 Left -  1 Right; default 0.5) - see SPREAD
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-sspread,0-1
SPREAD: Spatial spread of texture events (0 Central-position only - 1 Full-spread)
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-rseed,number
SEED: Same seed-no produces same output on re-run(default 0: differs each time)
0,0,1,0,1000,0,0,0,0,500,1000,0
-w,Whole input
OPTION: Always play whole input-sound (ignoring duration values)
-d,Fixed timestep
OPTION: Fixed timestep between groupnotes
-i,Not fixed instr.
OPTION: Each group NOT confined to a fixed instrument (default: fixed)
-h,Decorate topnote chord
OPTION: Decorate TOP-note chord:(default: first listed)
-e,Dec all notes of chds
OPTION: Decorate all notes of chords
-k,Discard orig line
OPTION: Discard original line after decoration

[128],5,25,6,texture,postdecor,Texture with decorations(random note-order)
1,Single harmonic field,Create a texture using a pitch set duplicated in all 8ves
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,-22,-23,-24,-25,-31,-32,-33,-34,-35,-36
2,Changing hmc fields,Create a texture using changing hmc fields
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,-22,-23,-24,-25,-31,-32,-33,-34,-35,-36
3,Single harmonic set,Create a texture using the pitches specified
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,-22,-23,-24,-25,-31,-32,-33,-34,-35,-36
4,Changing hmc sets,Create a texture using changing hmc sets
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,-22,-23,-24,-25,-31,-32,-33,-34,-35,-36
5,None,Create a texture using no specified pitches
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,-22,-23,-24,-25,-31,-32,-33,-34,-35,-36
notedata,datafile
NOTEDATA: Infofile, insnd 'pitches',harmonic fields pitches etc.
1,4,0,0,100,0,0,0,0,0,0,0
out dur,secs
OUT DUR: Minimum duration of outfile
1,0,1,1,12000,1,1,2,0.01,150,300,10
skip time,secs
SKIP TIME: Time between repeats of motif-to-decorate in notedata (between runs of 'line' substructure notelist)
1,0,2,-10000,10000,0,1,2,0.001,1,100,1
firstsnd,number
FIRSTSND: First sound to use, of infile sounds (1-no.of sounds; must be <=Last sound)
1,1,1,1,16,1,0,0,1,8,16,1
lastsnd,number
LASTSND: Last sound to use, of infile sounds (1-no.of sounds; must be >=First sound)
1,1,1,1,16,1,0,0,1,8,16,1
min gain,MIDI
MIN GAIN: Minimum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
max gain,MIDI
MAX GAIN: Maximum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
min dur,secs
MIN DUR: Minimum duration of events in texture (< Max dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
max dur,secs
MAX DUR: Maximum duration of events in texture (> Min dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
phgrid,msecs
PHGRID: a timegrid (MSecs) applying WITHIN the groups
1,1,1,0,1000,0,0,0,0,500,1000,0
group space,0-5
GROUP SPACE: Pan event-groups:0=Nochange;1=Scattered(deflt);2/3=decor to/from event;4/5=decor L-R/R-L 
1,1,1,0,5,0,0,0,0,2,5,0
gpspacerange,  value
GRPSPACERANGE: Spatial range of event-groups (Range 0-1: default 1)
1,1,1,0,1000,1000,1,2,0,0.5,1,1
amp rise,MIDI
AMP RISE: Amplitude change within groups: (0-127: default 0)
1,1,1,0,12700,0,1,2,0,64,127,0
contour,0-6    
CONTOUR: Amplitude contour of gps: 1=cresc; 2=flat; 3=decresc; 4=1or2; 5=1or3; 6=2or3; 0=mixture(deflt) 
1,1,1,0,6,0,0,0,0,3,6,0
Gpsize low,number
GPSIZE LOW: Smallest no. of events in groups (1-32767; not>Gpsize_high)
1,1,1,1,1000,1,0,0,1,500,1000,1
Gpsize high,number
GPSIZE HIGH: Largest no. of events in groups (1-32767; not<Gpsize-low)
1,1,1,1,1000,1,0,0,1,500,1000,1
gppack low,msecs
GPPACK LOW: Shortest time between event-onsets in groups (0.023 to 60000 msecs)
1,1,1,1,6000,1,0,0,1,3000,6000,1
gppack high,msecs
GPPACK HIGH: Longest time between event-onsets in groups (0.023 to 60000 msecs)
1,1,1,1,6000,1,0,0,1,3000,6000,1
gprange low,number
GPRANGE LOW: Min. pitch-range of groups: number of notes in range
1,1,1,1,100,1,0,0,1,50,100,1
gprange high,number
GPRANGE HIGH: Max. pitch-range of groups: number of notes in range
1,1,1,1,100,1,0,0,1,50,100,1
centring,0-6
CENTRING: 0:Decor pitches CENTRED on line pitches(deflt); 1:ABOVE; 2:BELOW; 3:C+A; 4:C+B; 5:A+B; 6:C+A+B 
1,1,1,0,6,0,0,0,0,3,6,0
-aatten, <1
ATTEN: Overall attenuation of the output (0.00002-1). May be needed to avoid overflow 
0,1,1,1,1000,500,1,4,0.001,0.5,1,0.5
-pposition,0-1
POSITION: Central pan position of output sound (0 Left -  1 Right; default 0.5) - see SPREAD
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-sspread,0-1
SPREAD: Spatial spread of texture events (0 Central-position only - 1 Full-spread)
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-rseed,number
SEED: Same seed-no produces same output on re-run(default 0: differs each time)
0,0,1,0,1000,0,0,0,0,500,1000,0
-w,Whole input
OPTION: Always play whole input-sound (ignoring duration values)
-d,Fixed timestep
OPTION: Fixed timestep between groupnotes
-i,Not fixed instr.
OPTION: Each group NOT confined to a fixed instrument (default: fixed)
-h,Decorate topnote chord
OPTION: Decorate TOP-note chord:(default: first listed)
-e,Dec all notes of chds
OPTION: Decorate all notes of chords
-k,Discard orig line
OPTION: Discard original line after decoration

[129],5,20,5,texture,ornate,Create ornamented texture (user-specified pitch shapes)
1,Single harmonic field,Create a texture using a pitch set duplicated in all 8ves
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33,-34,-35
2,Changing hmc fields,Create a texture using changing hmc fields
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33,-34,-35
3,Single harmonic set,Create a texture using the pitches specified
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33,-34,-35
4,Changing hmc sets,Create a texture using changing hmc sets
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33,-34,-35
5,None,Create a texture using no specified pitches
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33,-34,-35
notedata,datafile
NOTEDATA: Infofile, insnd 'pitches',harmonic fields pitches etc.
1,4,0,0,0,0,0,0,0,0,0,0
out dur,secs
OUT DUR: Minimum duration of outfile
1,0,1,1,12000,1,1,2,0.01,150,300,10
skip time,secs
SKIP TIME: Time between repeats of motif-to-decorate in notedata (between runs of 'line' substructure notelist)
1,0,2,-10000,10000,0,1,2,0.001,1,100,1
firstsnd,number
FIRSTSND: First sound to use, of infile sounds (1-no.of sounds; must be <=Last sound)
1,1,1,1,16,1,0,0,1,8,16,1
lastsnd,number
LASTSND: Last sound to use, of infile sounds (1-no.of sounds; must be >=First sound)
1,1,1,1,16,1,0,0,1,8,16,1
min gain,MIDI
MIN GAIN: Minimum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
max gain,MIDI
MAX GAIN: Maximum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
min dur,secs
MIN DUR: Minimum duration of events in texture (< Max dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
max dur,secs
MAX DUR: Maximum duration of events in texture (> Min dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
phgrid,msecs
PHGRID: a timegrid (MSecs) applying WITHIN the groups
1,1,1,0,1000,0,0,0,0,500,1000,0
group space,0-5
GROUP SPACE: Pan event-groups:0=Nochange;1=Scattered(deflt);2/3=decor to/from event;4/5=decor L-R/R-L 
1,1,1,0,5,0,0,0,0,2,5,0
gpspacerange,  value
GRPSPACERANGE: Spatial range of event-groups (Range 0-1: default 1)
1,1,1,0,1000,1000,1,2,0,0.5,1,1
amp rise,MIDI
AMP RISE: Amplitude change within groups: (0-127: default 0)
1,1,1,0,12700,0,1,2,0,64,127,0
contour,0-6    
CONTOUR: Amplitude contour of gps: 1=cresc; 2=flat; 3=decresc; 4=1or2; 5=1or3; 6=2or3; 0=mixture(deflt) 
1,1,1,0,6,0,0,0,0,3,6,0
mult low,multiplier
MULT LOW: Minimum multiplier of total input duration of motif (<=Mult_high)
1,1,2,-1000,1000,0,1,2,0.01,1,100,1
mult high,multiplier
MULT HIGH: Maximum multiplier of total input duration of motif (>=Mult-low)
1,1,2,-1000,1000,0,1,2,0.01,1,100,1
-aatten, <1
ATTEN: Overall attenuation of the output (0.00002-1). May be needed to avoid overflow 
0,1,1,1,1000,500,1,4,0.001,0.5,1,0.5
-pposition,0-1
POSITION: Central pan position of output sound (0 Left -  1 Right; default 0.5) - see SPREAD
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-sspread,0-1
SPREAD: Spatial spread of texture events (0 Central-position only - 1 Full-spread)
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-rseed,number
SEED: Same seed-no produces same output on re-run(default 0: differs each time)
0,0,1,0,1000,0,0,0,0,500,1000,0
-w,Whole input
OPTION: Always play whole input-sound (ignoring duration values)
-d,Fixed timestep
OPTION: Fixed time-step between group notes
-i,Not fixed instr.
OPTION: Each group NOT confined to a fixed instrument (default: fixed)
-h,Ornate highest
OPTION: Ornaments on highest note of any chord:(default: first note listed)
-e,Ornate all notes
OPTION: Ornaments on all notes of any chord

[130],5,20,5,texture,preornate,Create ornamented texture (user-specified pitch shapes)
1,Single harmonic field,Create a texture using a pitch set duplicated in all 8ves
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33,-34,-35
2,Changing hmc fields,Create a texture using changing hmc fields
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33,-34,-35
3,Single harmonic set,Create a texture using the pitches specified
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33,-34,-35
4,Changing hmc sets,Create a texture using changing hmc sets
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33,-34,-35
5,None,Create a texture using no specified pitches
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33,-34,-35
notedata,datafile
NOTEDATA: Infofile, insnd 'pitches',harmonic fields pitches etc.
1,4,0,0,0,0,0,0,0,0,0,0
out dur,secs
OUT DUR: Minimum duration of outfile
1,0,1,1,12000,1,1,2,0.01,150,300,10
skip time,secs
SKIP TIME: Time between repeats of motif-to-decorate in notedata (between runs of 'line' substructure notelist)
1,0,2,-10000,10000,0,1,2,0.001,1,100,1
firstsnd,number
FIRSTSND: First sound to use, of infile sounds (1-no.of sounds; must be <=Last sound)
1,1,1,1,16,1,0,0,1,8,16,1
lastsnd,number
LASTSND: Last sound to use, of infile sounds (1-no.of sounds; must be >=First sound)
1,1,1,1,16,1,0,0,1,8,16,1
min gain,MIDI
MIN GAIN: Minimum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
max gain,MIDI
MAX GAIN: Maximum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
min dur,secs
MIN DUR: Minimum duration of events in texture (< Max dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
max dur,secs
MAX DUR: Maximum duration of events in texture (> Min dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
phgrid,msecs
PHGRID: a timegrid (MSecs) applying WITHIN the groups
1,1,1,0,1000,0,0,0,0,500,1000,0
group space,0-5
GROUP SPACE: Pan event-groups:0=Nochange;1=Scattered(deflt);2/3=decor to/from event;4/5=decor L-R/R-L 
1,1,1,0,5,0,0,0,0,2,5,0
gpspacerange, value
GRPSPACERANGE: Spatial range of event-groups (Range 0-1: default 1)
1,1,1,0,1000,1000,1,2,0,0.5,1,1
amp rise,MIDI
AMP RISE: Amplitude change within groups: (0-127: default 0)
1,1,1,0,12700,0,1,2,0,64,127,0
contour,0-6    
CONTOUR: Amplitude contour of gps: 1=cresc; 2=flat; 3=decresc; 4=1or2; 5=1or3; 6=2or3; 0=mixture(deflt) 
1,1,1,0,6,0,0,0,0,3,6,0
mult low,multiplier
MULT LOW: Minimum multiplier of total input duration of motif (<=Mult_High)
1,1,2,-1000,1000,0,1,2,0.01,1,100,1
mult high,multiplier
MULT HIGH: Maximum multiplier of total input duration of motif (>=Mult-low)
1,1,2,-1000,1000,0,1,2,0.01,1,100,1
-aatten, <1
ATTEN: Overall attenuation of the output (0.00002-1). May be needed to avoid overflow 
0,1,1,1,1000,500,1,4,0.001,0.5,1,0.5
-pposition,0-1
POSITION: Central pan position of output sound (0 Left -  1 Right; default 0.5) - see SPREAD
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-sspread,0-1
SPREAD: Spatial spread of texture events (0 Central-position only - 1 Full-spread)
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-rseed,number
SEED: Same seed-no produces same output on re-run(default 0: differs each time)
0,0,1,0,1000,0,0,0,0,500,1000,0
-w,Whole input
OPTION: Always play whole input-sound (ignoring duration values)
-d,Fixed timestep
OPTION: Fixed time-step between group notes
-i,Not fixed instr.
OPTION: Each group NOT confined to a fixed instrument (default: fixed)
-h,Ornate highest
OPTION: Ornaments on highest note of any chord:(default: first note listed)
-e,Ornate all notes
OPTION: Ornaments on all notes of any chord

[131],5,20,5,texture,postornate,Create ornamented texture (user-specified pitch shapes)
1,Single harmonic field,Create a texture using a pitch set duplicated in all 8ves
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33,-34,-35
2,Changing hmc fields,Create a texture using changing hmc fields
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33,-34,-35
3,Single harmonic set,Create a texture using the pitches specified
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33,-34,-35
4,Changing hmc sets,Create a texture using changing hmc sets
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33,-34,-35
5,None,Create a texture using no specified pitches
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33,-34,-35
notedata,datafile
NOTEDATA: Infofile, insnd 'pitches',harmonic fields pitches etc.
1,4,0,0,0,0,0,0,0,0,0,0
out dur,secs
OUT DUR: Minimum duration of outfile
1,0,1,1,12000,1,1,2,0.01,150,300,10
skip time,secs
SKIP TIME: Time between repeats of motif-to-decorate in notedata (between runs of 'line' substructure notelist)
1,0,2,-10000,10000,0,1,2,0.001,1,100,1
firstsnd,number
FIRSTSND: First sound to use, of infile sounds (1-no.of sounds; must be <=Last sound)
1,1,1,1,16,1,0,0,1,8,16,1
lastsnd,number
LASTSND: Last sound to use, of infile sounds (1-no.of sounds; must be >=First sound)
1,1,1,1,16,1,0,0,1,8,16,1
min gain,MIDI
MIN GAIN: Minimum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
max gain,MIDI
MAX GAIN: Maximum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
min dur,secs
MIN DUR: Minimum duration of events in texture (< Max dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
max dur,secs
MAX DUR: Maximum duration of events in texture (> Min dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
phgrid,msecs
PHGRID: a timegrid (MSecs) applying WITHIN the groups
1,1,1,0,1000,0,0,0,0,500,1000,0
group space,0-5
GROUP SPACE: Pan event-groups:0=Nochange;1=Scattered(deflt);2/3=decor to/from event;4/5=decor L-R/R-L 
1,1,1,0,5,0,0,0,0,2,5,0
gpspacerange,  value
GRPSPACERANGE: Spatial range of event-groups (Range 0-1: default 1)
1,1,1,0,1000,1000,1,2,0,0.5,1,1
amp rise,MIDI
AMP RISE: Amplitude change within groups: (0-127: default 0)
1,1,1,0,12700,0,1,2,0,64,127,0
contour,0-6    
CONTOUR: Amplitude contour of gps: 1=cresc; 2=flat; 3=decresc; 4=1or2; 5=1or3; 6=2or3; 0=mixture(deflt) 
1,1,1,0,6,0,0,0,0,3,6,0
mult low,multiplier
MULT LOW: Minimum multiplier of total input duration of motif (<=Mult_high)
1,1,2,-1000,1000,0,1,2,0.01,1,100,1
mult high,multiplier
MULT HIGH: Maximum multiplier of total input duration of motif (>=Mult-low)
1,1,2,-1000,1000,0,1,2,0.01,1,100,1
-aatten, <1
ATTEN: Overall attenuation of the output (0.00002-1). May be needed to avoid overflow 
0,1,1,1,1000,500,1,4,0.001,0.5,1,0.5
-pposition,0-1
POSITION: Central pan position of output sound (0 Left -  1 Right; default 0.5) - see SPREAD
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-sspread,0-1
SPREAD: Spatial spread of texture events (0 Central-position only - 1 Full-spread)
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-rseed,number
SEED: Same seed-no produces same output on re-run(default 0: differs each time)
0,0,1,0,1000,0,0,0,0,500,1000,0
-w,Whole input
OPTION: Always play whole input-sound (ignoring duration values)
-d,Fixed timestep
OPTION: Fixed time-step between group notes
-i,Not fixed instr.
OPTION: Each group NOT confined to a fixed instrument (default: fixed)
-h,Ornate highest
OPTION: Ornaments on highest note of any chord:(default: first note listed)
-e,Ornate all notes
OPTION: Ornaments on all notes of any chord

[132],5,22,3,texture,motifs,Texture of user-specified motifs
1,Single harmonic field,Create a texture using a pitch set duplicated in all 8ves
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,-19,-20,-21,-22,-31,-32,-33
2,Changing hmc fields,Create a texture using changing hmc fields
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,-19,-20,-21,-22,-31,-32,-33
3,Single harmonic set,Create a texture using the pitches specified
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,-19,-20,-21,-22,-31,-32,-33
4,Changing hmc sets,Create a texture using changing hmc sets
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,-19,-20,-21,-22,-31,-32,-33
5,None,Create a texture using no specified pitches
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,-19,-20,-21,-22,-31,-32,-33
notedata,datafile
NOTEDATA: Infofile, insnd 'pitches',harmonic fields pitches etc.
1,4,0,0,0,0,0,0,0,0,0,0
out dur,secs
OUT DUR: Minimum duration of outfile
1,0,1,1,12000,1,1,2,0.01,150,300,10
Packing, secs
PACKING: average time between event onsets
1,1,2,-10000,6000,1,1,3,0.001,1,60,0.25
scatter,value
SCATTER: randomisation of event-onsets (0 - 10)
1,1,1,0,1000,0,1,2,0,5,10,0
timegrid,msecs
TIMEGRID: minimum step(Msecs) in quantised timegrid (for group start-times) Default 0
1,1,1,0,1000,0,0,0,0,500,1000,0
firstsnd,number
FIRSTSND: First sound to use, of infile sounds (1-no.of sounds; must be <=Last sound)
1,1,1,1,16,1,0,0,1,8,16,1
lastsnd,number
LASTSND: Last sound to use, of infile sounds (1-no.of sounds; must be >=First sound)
1,1,1,1,16,1,0,0,1,8,16,1
min gain,MIDI
MIN GAIN: Minimum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
max gain,MIDI
MAX GAIN: Maximum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
min pitch,MIDI
MIN PITCH: Minimum pitch - <Max pitch (MIDI VALUE 0-127, Mid-C=60, fractions allowed)
1,1,1,0,12700,6000,1,2,0,64,127,60
max pitch,MIDI
MAX PITCH: Maximum pitch - >Min pitch (MIDI VALUE 0-127, Mid-C=60, fractions allowed)
1,1,1,0,12700,6000,1,2,0,64,127,60
phgrid,msecs
PHGRID: a timegrid (MSecs) applying WITHIN the groups
1,1,1,0,1000,0,0,0,0,500,1000,0
group space,0-5
GROUP SPACE: Pan event-groups:0=Nochange;1=Scattered(deflt);2/3=decor to/from event;4/5=decor L-R/R-L 
1,1,1,0,5,0,0,0,0,2,5,0
gpspacerange,  value
GRPSPACERANGE: Spatial range of event-groups (Range 0-1: default 1)
1,1,1,0,1000,1000,1,2,0,0.5,1,1
amp rise,MIDI
AMP RISE: Amplitude change within groups: (0-127: default 0)
1,1,1,0,12700,0,1,2,0,64,127,0
contour,0-6    
CONTOUR: Amplitude contour of gps:1=cresc;2=flat;3=decresc;4=1or2;5=1or3;6=2or3;0=mixture(deflt) 
1,1,1,0,6,0,0,0,0,3,6,0
mult low,multiplier
MULT LOW: Minimum multiplier of total input duration of motif (<=Mult_high)
1,1,2,-1000,1000,0,1,2,0.01,1,100,1
mult high,multiplier
MULT HIGH: Maximum multiplier of total input duration of motif (>=Mult-low)
1,1,2,-1000,1000,0,1,2,0.01,1,100,1
-aatten,0-1
ATTEN: Overall attenuation of the output (0-1) - may be required to avoid overflow 
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-pposition,0-1
POSITION: Central pan position of output sound (0 Left -  1 Right; default 0.5) - see SPREAD
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-sspread,0-1
SPREAD: Spatial spread of texture events (0 Central-position only - 1 Full-spread)
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-rseed,number
SEED: Same seed-no produces same output on re-run(default 0: differs each time)
0,0,1,0,1000,0,0,0,0,500,1000,0
-w,Whole input
OPTION: Always play whole input-sound (ignoring duration values)
-d,Fixed timestep
OPTION: Fixed timestep between groupnotes
-i,Not fixed instr.
OPTION: Each group NOT confined to a fixed instrument (default: fixed)

[133],4,22,3,texture,motifsin,Texture of user-specified motifs on harmonic field
1,Single harmonic field,Create a texture using a pitch set duplicated in all 8ves
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,-19,-20,-21,-22,-31,-32,-33
2,Changing hmc fields,Create a texture using changing hmc fields
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,-19,-20,-21,-22,-31,-32,-33
3,Single harmonic set,Create a texture using the pitches specified
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,-19,-20,-21,-22,-31,-32,-33
4,Changing hmc sets,Create a texture using changing hmc sets
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,-19,-20,-21,-22,-31,-32,-33
notedata,datafile
NOTEDATA: Infofile, insnd 'pitches',harmonic fields pitches etc.
1,4,0,0,0,0,0,0,0,0,0,0
out dur,secs
OUT DUR: Minimum duration of outfile
1,0,1,1,12000,1,1,2,0.01,150,300,10
packing, secs
PACKING: average time between event onsets
1,1,2,-10000,6000,1,1,3,0.001,1,60,0.25
scatter,value
SCATTER: randomisation of event-onsets (0 - 10)
1,1,1,0,1000,0,1,2,0,5,10,0
timegrid,msecs
TIMEGRID: minimum step(Msecs) in quantised timegrid (for group start-times) Default 0
1,1,1,0,1000,0,0,0,0,500,1000,0
firstsnd,number
FIRSTSND: First sound to use, of infile sounds (1-no.of sounds; must be <=Last sound)
1,1,1,1,16,1,0,0,1,8,16,1
lastsnd,number
LASTSND: Last sound to use, of infile sounds (1-no.of sounds; must be >=First sound)
1,1,1,1,16,1,0,0,1,8,16,1
min gain,MIDI
MIN GAIN: Minimum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
max gain,MIDI
MAX GAIN: Maximum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
min pitch,MIDI
MIN PITCH: Minimum pitch - <Max pitch (MIDI VALUE 0-127, Mid-C=60, fractions allowed)
1,1,1,0,12700,6000,1,2,0,64,127,60
max pitch,MIDI
MAX PITCH: Maximum pitch - >Min pitch (MIDI VALUE 0-127, Mid-C=60, fractions allowed)
1,1,1,0,12700,6000,1,2,0,64,127,60
phgrid,msecs
PHGRID: a timegrid (MSecs) applying WITHIN the groups
1,1,1,0,1000,0,0,0,0,500,1000,0
group space,0-5
GROUP SPACE: Pan event-groups:0=Nochange;1=Scattered(deflt);2/3=decor to/from event;4/5=decor L-R/R-L 
1,1,1,0,5,0,0,0,0,2,5,0
gpspacerange,  value
GRPSPACERANGE: Spatial range of event-groups (Range 0-1: default 1)
1,1,1,0,1000,1000,1,2,0,0.5,1,1
amp rise,MIDI
AMP RISE: Amplitude change within groups: (0-127: default 0)
1,1,1,0,12700,0,1,2,0,64,127,0
contour,0-6    
CONTOUR: Amplitude contour of gps:1=cresc;2=flat;3=decresc;4=1or2;5=1or3;6=2or3;0=mixture(deflt) 
1,1,1,0,6,0,0,0,0,3,6,0
mult low,multiplier
MULT LOW: Minimum multiplier of total input duration of motif (<=Mult_high)
1,1,2,-1000,1000,0,1,2,0.01,1,100,1
mult high,multiplier
MULT HIGH: Maximum multiplier of total input duration of motif (>=Mult-low)
1,1,2,-1000,1000,0,1,2,0.01,1,100,1
-aatten,0-1
ATTEN: Overall attenuation of the output (0-1) - may be required to avoid overflow 
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-pposition,0-1
POSITION: Central pan position of output sound (0 Left -  1 Right; default 0.5) - see SPREAD
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-sspread,0-1
SPREAD: Spatial spread of texture events (0 Central-position only - 1 Full-spread)
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-rseed,number
SEED: Same seed-no produces same output on re-run(default 0: differs each time)
0,0,1,0,1000,0,0,0,0,500,1000,0
-w,Whole input
OPTION: Always play whole input-sound (ignoring duration values)
-d,Fixed timestep
OPTION: Fixed timestep between groupnotes
-i,Not fixed instr.
OPTION: Each group NOT confined to a fixed instrument (default: fixed)

[134],5,15,1,texture,timed,Texture of timed events from one or more sounds
1,Single harmonic field,Create a texture using a pitch set duplicated in all 8ves
1,2,3,4,5,6,7,8,9,10,11,-12,-13,-14,-15,-31
2,Changing hmc fields,Create a texture using changing hmc fields
1,2,3,4,5,6,7,8,9,10,11,-12,-13,-14,-15,-31
3,Single harmonic set,Create a texture using the pitches specified
1,2,3,4,5,6,7,8,9,10,11,-12,-13,-14,-15,-31
4,Changing hmc sets,Create a texture using changing hmc sets
1,2,3,4,5,6,7,8,9,10,11,-12,-13,-14,-15,-31
5,None,Create a texture using no specified pitches
1,2,3,4,5,6,7,8,9,10,11,-12,-13,-14,-15,-31
notedata,datafile
NOTEDATA: Infofile, insnd 'pitches',harmonic fields pitches etc.
1,4,0,0,0,0,0,0,0,0,0,0
out dur,secs
OUT DUR: Minimum duration of outfile
1,0,1,1,12000,1,1,2,0.01,150,300,10
skip time,secs
SKIP TIME: Time between repetitions of timing motif in the note data file
1,0,1,0,3000,0,1,2,0,150,300,0
firstsnd,number
FIRSTSND: First sound to use, of infile sounds (1-no.of sounds; must be <=Last sound)
1,1,1,1,16,1,0,0,1,8,16,1
lastsnd,number
LASTSND: Last sound to use, of infile sounds (1-no.of sounds; must be >=First sound)
1,1,1,1,16,1,0,0,1,8,16,1
min gain,MIDI
MIN GAIN: Minimum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
max gain,MIDI
MAX GAIN: Maximum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
min dur,secs
MIN DUR: Minimum duration of events in texture (< Max dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
max dur,secs
MAX DUR: Maximum duration of events in texture (> Min dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
min pitch,MIDI
MIN PITCH: Minimum pitch - <Max pitch (MIDI VALUE 0-127, Mid-C=60, fractions allowed)
1,1,1,0,12700,6000,1,2,0,64,127,60
max pitch,MIDI
MAX PITCH: Maximum pitch - >Min pitch (MIDI VALUE 0-127, Mid-C=60, fractions allowed)
1,1,1,0,12700,6000,1,2,0,64,127,60
-aatten,0-1
ATTEN: Overall attenuation of the output (0-1) - may be required to avoid overflow 
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-pposition,0-1
POSITION: Central pan position of output sound (0 Left -  1 Right; default 0.5) - see SPREAD
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-sspread,0-1
SPREAD: Spatial spread of texture events (0 Central-position only - 1 Full-spread)
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-rseed,number
SEED: Same seed-no produces same output on re-run(default 0: differs each time)
0,0,1,0,1000,0,0,0,0,500,1000,0
-w,whole input
OPTION: Always play whole input-sound (ignoring duration values)

[135],5,26,3,texture,tgrouped,Timed texture of event groups with random pitch-shapes
1,Single harmonic field,Create a texture using a pitch set duplicated in all 8ves
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,-23,-24,-25,-26,-31,-32,-33
2,Changing hmc fields,Create a texture using changing hmc fields
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,-23,-24,-25,-26,-31,-32,-33
3,Single harmonic set,Create a texture using the pitches specified
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,-23,-24,-25,-26,-31,-32,-33
4,Changing hmc sets,Create a texture using changing hmc sets
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,-23,-24,-25,-26,-31,-32,-33
5,None,Create a texture using no specified pitches
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,-23,-24,-25,-26,-31,-32,-33
notedata,datafile
NOTEDATA: Infofile, insnd 'pitches',harmonic fields pitches etc.
1,4,0,0,0,0,0,0,0,0,0,0
out dur,secs
OUT DUR: Minimum duration of outfile
1,0,1,1,12000,1,1,2,0.01,150,300,10
skip time,secs
SKIP TIME: Time between repetitions of timing motif in the note data file
1,0,1,0,3000,0,1,2,0,150,300,0
firstsnd,number
FIRSTSND: First sound to use, of infile sounds (1-no.of sounds; must be <=Last sound)
1,1,1,1,16,1,0,0,1,8,16,1
lastsnd,number
LASTSND: Last sound to use, of infile sounds (1-no.of sounds; must be >=First sound)
1,1,1,1,16,1,0,0,1,8,16,1
min gain,MIDI
MIN GAIN: Minimum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
max gain,MIDI
MAX GAIN: Maximum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
min dur,secs
MIN DUR: Minimum duration of events in texture (< Max dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
max dur,secs
MAX DUR: Maximum duration of events in texture (> Min dur; 0.016-32767)
1,1,2,-8400,8000,0,1,2,0.016,1,80,1
min pitch,MIDI
MIN PITCH: Minimum pitch - <Max pitch (MIDI VALUE 0-127, Mid-C=60, fractions allowed)
1,1,1,0,12700,6000,1,2,0,64,127,60
max pitch,MIDI
MAX PITCH: Maximum pitch - >Min pitch (MIDI VALUE 0-127, Mid-C=60, fractions allowed)
1,1,1,0,12700,6000,1,2,0,64,127,60
phgrid,msecs
PHGRID: a timegrid (MSecs) applying WITHIN the groups
1,1,1,0,1000,0,0,0,0,500,1000,0
group space,0-5
GROUP SPACE: Pan event-groups:0=Nochange;1=Scattered(deflt);2/3=decor to/from event;4/5=decor L-R/R-L 
1,1,1,0,5,0,0,0,0,2,5,0
gpspacerange,  value
GRPSPACERANGE: Spatial range of event-groups (Range 0-1: default 1)
1,1,1,0,1000,1000,1,2,0,0.5,1,1
amp rise,MIDI
AMP RISE: Amplitude change within groups: (0-127: default 0)
1,1,1,0,12700,0,1,2,0,64,127,0
contour,0-6    
CONTOUR: Amplitude contour of gps:1=cresc;2=flat;3=decresc;4=1or2;5=1or3;6=2or3;0=mixture(deflt) 
1,1,1,0,6,0,0,0,0,3,6,0
Gpsize low,number
GPSIZE LOW: Smallest no. of events in groups (1-32767; not>Gpsize_high)
1,1,1,1,1000,1,0,0,1,500,1000,1
Gpsize high,number
GPSIZE HIGH: Largest no. of events in groups (1-32767; not<Gpsize-low)
1,1,1,1,1000,1,0,0,1,500,1000,1
gppack low,msecs
GPPACK LOW: Shortest time between event-onsets in groups (0.023 to 60000 msecs)
1,1,1,1,6000,25,0,0,1,3000,6000,25
gppack high,msecs
GPPACK HIGH: Longest time between event-onsets in groups (0.023 to 60000 msecs)
1,1,1,1,6000,50,0,0,1,3000,6000,50
gprange low,number
GPRANGE LOW: Min. pitch-range of groups: number of notes in range
1,1,1,1,100,1,0,0,1,50,100,1
gprange high,number
GPRANGE HIGH: Max. pitch-range of groups: number of notes in range
1,1,1,1,100,1,0,0,1,50,100,1
-aatten,0-1
ATTEN: Overall attenuation of the output (0-1) - may be required to avoid overflow 
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-pposition,0-1
POSITION: Central pan position of output sound (0 Left -  1 Right; default 0.5) - see SPREAD
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-sspread,0-1
SPREAD: Spatial spread of texture events (0 Central-position only - 1 Full-spread)
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-rseed,number
SEED: Same seed-no produces same output on re-run(default 0: differs each time)
0,0,1,0,1000,0,0,0,0,500,1000,0
-w,Whole input
OPTION: Always play whole input-sound (ignoring duration values)
-d,Fixed timestep
OPTION: Fixed timestep between groupnotes
-i,Not fixed instr.
OPTION: Each group NOT confined to a fixed instrument (default: fixed)

[136],5,20,3,texture,tmotifs,Timed texture of motifs not forced onto hmc field
1,Single harmonic field,Create a texture using a pitch set duplicated in all 8ves
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33
2,Changing hmc fields,Create a texture using changing hmc fields
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33
3,Single harmonic set,Create a texture using the pitches specified
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33
4,Changing hmc sets,Create a texture using changing hmc sets
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33
5,None,Create a texture using no specified pitches
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33
notedata,datafile
NOTEDATA: Infofile, insnd 'pitches',harmonic fields pitches etc.
1,4,0,0,0,0,0,0,0,0,0,0
out dur,secs
OUT DUR: Minimum duration of outfile
1,0,1,1,12000,1,1,2,0.01,150,300,10
skip time,secs
SKIP TIME: Time between repeats of motif-to-decorate in notedata (between runs of 'line' substructure notelist)
1,0,1,0,3000,0,1,2,0,150,300,0
firstsnd,number
FIRSTSND: First sound to use, of infile sounds (1-no.of sounds; must be <=Last sound)
1,1,1,1,16,1,0,0,1,8,16,1
lastsnd,number
LASTSND: Last sound to use, of infile sounds (1-no.of sounds; must be >=First sound)
1,1,1,1,16,1,0,0,1,8,16,1
min gain,MIDI
MIN GAIN: Minimum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
max gain,MIDI
MAX GAIN: Maximum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
min pitch,MIDI
MIN PITCH: Minimum pitch - <Max pitch (MIDI VALUE 0-127, Mid-C=60, fractions allowed)
1,1,1,0,12700,6000,1,2,0,64,127,60
max pitch,MIDI
MAX PITCH: Maximum pitch - >Min pitch (MIDI VALUE 0-127, Mid-C=60, fractions allowed)
1,1,1,0,12700,6000,1,2,0,64,127,60
phgrid,msecs
PHGRID: a timegrid (MSecs) applying WITHIN the groups
1,1,1,0,1000,0,0,0,0,500,1000,0
group space,0-5
GROUP SPACE: Pan event-groups:0=Nochange;1=Scattered(deflt);2/3=decor to/from event;4/5=decor L-R/R-L 
1,1,1,0,5,0,0,0,0,2,5,0
gpspacerange,  value
GRPSPACERANGE: Spatial range of event-groups (Range 0-1: default 1)
1,1,1,0,1000,1000,1,2,0,0.5,1,1
amp rise,MIDI
AMP RISE: Amplitude change within groups: (0-127: default 0)
1,1,1,0,12700,0,1,2,0,64,127,0
contour,0-6    
CONTOUR: Amplitude contour of gps: 1=cresc; 2=flat; 3=decresc; 4=1or2; 5=1or3; 6=2or3; 0=mixture(deflt) 
1,1,1,0,6,0,0,0,0,3,6,0
mult low,multiplier
MULT LOW: Minimum multiplier of total input duration of motif (<=Mult_high)
1,1,2,-1000,1000,0,1,2,0.01,1,100,1
mult high,multiplier
MULT HIGH: Maximum multiplier of total input duration of motif (>=Mult-low)
1,1,2,-1000,1000,0,1,2,0.01,1,100,1
-aatten,0-1
ATTEN: Overall attenuation of the output (0-1) - may be required to avoid overflow 
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-pposition,0-1
POSITION: Central pan position of output sound (0 Left -  1 Right; default 0.5) - see SPREAD
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-sspread,0-1
SPREAD: Spatial spread of texture events (0 Central-position only - 1 Full-spread)
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-rseed,number
SEED: Same seed-no produces same output on re-run(default 0: differs each time)
0,0,1,0,1000,0,0,0,0,500,1000,0
-w,Whole input
OPTION: Always play whole input-sound (ignoring duration values)
-d,Fixed timestep
OPTION: Fixed time-step between group notes
-i,Not fixed instr.
OPTION: Each group NOT confined to a fixed instrument (default: fixed)

[137],4,20,3,texture,tmotifsin,Timed texture of motifs forced onto hmc field
1,Single harmonic field,Create a texture using a pitch set duplicated in all 8ves
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33
2,Changing hmc fields,Create a texture using changing hmc fields
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33
3,Single harmonic set,Create a texture using the pitches specified
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33
4,Changing hmc sets,Create a texture using changing hmc sets
1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,-17,-18,-19,-20,-31,-32,-33
notedata,datafile
NOTEDATA: Infofile, insnd 'pitches',harmonic fields pitches etc.
1,4,0,0,0,0,0,0,0,0,0,0
out dur,secs
OUT DUR: Minimum duration of outfile
1,0,1,1,12000,1,1,2,0.01,150,300,10
skip time,secs
SKIP TIME: Time between repeats of motif-to-decorate in notedata (between runs of 'line' substructure notelist)
1,0,1,0,3000,0,1,2,0,150,300,0
firstsnd,number
FIRSTSND: First sound to use, of infile sounds (1-no.of sounds; must be <=Last sound)
1,1,1,1,16,1,0,0,1,8,16,1
lastsnd,number
LASTSND: Last sound to use, of infile sounds (1-no.of sounds; must be >=First sound)
1,1,1,1,16,1,0,0,1,8,16,1
min gain,MIDI
MIN GAIN: Minimum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
max gain,MIDI
MAX GAIN: Maximum level of input events - in MIDI values (1-127: default 64)
1,1,1,1,127,64,1,2,1,64,127,64
min pitch,MIDI
MIN PITCH: Minimum pitch - <Max pitch (MIDI VALUE 0-127, Mid-C=60, fractions allowed)
1,1,1,0,12700,6000,1,2,0,64,127,60
max pitch,MIDI
MAX PITCH: Maximum pitch - >Min pitch (MIDI VALUE 0-127, Mid-C=60, fractions allowed)
1,1,1,0,12700,6000,1,2,0,64,127,60
phgrid,msecs
PHGRID: a timegrid (MSecs) applying WITHIN the groups
1,1,1,0,1000,0,0,0,0,500,1000,0
group space,0-5
GROUP SPACE: Pan event-groups:0=Nochange;1=Scattered(deflt);2/3=decor to/from event;4/5=decor L-R/R-L 
1,1,1,0,5,0,0,0,0,2,5,0
gpspacerange,  value
GRPSPACERANGE: Spatial range of event-groups (Range 0-1: default 1)
1,1,1,0,1000,1000,1,2,0,0.5,1,1
amp rise,MIDI
AMP RISE: Amplitude change within groups: (0-127: default 0)
1,1,1,0,12700,0,1,2,0,64,127,0
contour,0-6    
CONTOUR: Amplitude contour of gps: 1=cresc; 2=flat; 3=decresc; 4=1or2; 5=1or3; 6=2or3; 0=mixture(deflt) 
1,1,1,0,6,0,0,0,0,3,6,0
mult low,multiplier
MULT LOW: Minimum multiplier of total input duration of motif (<=Mult_high)
1,1,2,-1000,1000,0,1,2,0.01,1,100,1
mult high,multiplier
MULT HIGH: Maximum multiplier of total input duration of motif (>=Mult-low)
1,1,2,-1000,1000,0,1,2,0.01,1,100,1
-aatten,0-1
ATTEN: Overall attenuation of the output (0-1) - may be required to avoid overflow 
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-pposition,0-1
POSITION: Central pan position of output sound (0 Left -  1 Right; default 0.5) - see SPREAD
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-sspread,0-1
SPREAD: Spatial spread of texture events (0 Central-position only - 1 Full-spread)
0,1,1,0,1000,500,1,2,0,0.5,1,0.5
-rseed,number
SEED: Same seed-no produces same output on re-run(default 0: differs each time)
0,0,1,0,1000,0,0,0,0,500,1000,0
-w,Whole input
OPTION: Always play whole input-sound (ignoring duration values)
-d,Fixed timestep
OPTION: Fixed time-step between group notes
-i,Not fixed instr.
OPTION: Each group NOT confined to a fixed instrument (default: fixed)

//-------------------------------------------------------------------------------
//                   N O N - T E X T U R E   P R O C E S S E S 
//-------------------------------------------------------------------------------
[198],5,12,1,,,Delay with feedback and modulation
modify revecho 1,Fixed Delay (full range),Fixed delay time with feedback
1,3,4,5,-6,-31
modify revecho 1,Fixed Delay (short),Fixed short delay time with feedback
2,3,4,5,-6,-31
modify revecho 2,Vari-Delay (full range),Delay with feedback and modulation
1,3,4,8,9,10,11,5,-6,-7
modify revecho 2,Vari-Delay (short),Short delay with feedback and modulation
2,3,4,8,9,10,11,5,-6,-7
newdelay newdelay,Pitched delay,Pitch-defined delay with feedback
12,3,4
delay,msecs
DELAY: Length of delay before signal repeated (Full range: 0.023-10000 msecs) 
1,0,2,-10000,10000,0,1,1,0.023,1000,10000,1000
delay,msecs
DELAY Length of delay before signal repeated (Short range: 0.023-100 msecs) 
1,0,2,-10000,10000,0,1,2,0.023,1,100,1.0
mix,0-1
MIX: Amount of delayed signal in mix - 0 is dry (original only); 1 is 100% (processed only)
1,0,1,0,100,50,1,2,0,0.5,1,0.5
feedback,amount
Delayed signal fed back to create echoes/resonance (-0.999 to +0.999; T-V only in Fixed modes)
1,1,1,-9990,9990,0,1,2,-0.999,0,0.999,0
tail,secs
TAIL: time to allow delayed signal to decay to zero  (Range: 0-30 secs)
1,0,1,0,3000,0,1,2,0,15,30,0
-pprescale,multiplier
PRESCALE: Scale input level to avoid overload  (Range: 0.000031 to 1.0)
0,0,1,1,100,100,1,2,0.01,0.5,1,1
-sseed,no.
SEED: where random LFO freq. used, >0 gives reproducible output (with same seed no.)
0,0,1,0,250,0,0,0,0,125,250,0
lfo mod,0-1
LFO MOD Modulation Depth: range of delay variation sweep (Range: 0 to 1)
1,0,1,0,100,0,1,2,0,0.5,1,0
lfo freq,Hz
LFO FREQ: Frequency (Hz.) of delay variation sweep; negative values give random oscillations
1,0,1,-5000,5000,0,1,2,-50.0,0,50.0,0
lfo phase,0-1
LFO PHASE: Start phase of delay variation sweep (Range: 0 to 1)
1,0,1,0,100,0,1,2,0,0.5,1,0
lfo delay,secs
LFO DELAY: Time before delay variation sweep begins (0-filelength secs)
1,0,3,0,1000,0,1,2,0,0,0,0
pchdelay,MIDI
PITCHED DELAY: Delay time expressed as MIDI pitch values (MIDI: -76 to +136) T-V
1,1,1,-7600,13600,0,1,2,-76,0,136,0
-i, Invert signal
OPTION: Invert the dry signal in Fixed Delay (for phasing effects)

[1981],2,11,0,modify,revecho,Variable Delay [legacy page: use DELAY for new patches]
2,Short Delay,Short Delay with feedback and modulation
1,3,4,8,9,10,11,5,-6,-7
2,Long Delay,Long Delay with feedback and modulation
2,3,4,8,9,10,11,5,-6,-7
delay,msecs
DELAY Length of delay before signal repeated (Range: 0.023-10000 msecs) 
1,0,2,-10000,10000,0,1,2,0.023,1,100,1.0
delay,msecs
DELAY: Length of delay before signal repeated (Range: 0.023-10000 msecs) 
1,0,2,-10000,10000,0,1,1,0.023,1000,10000,1000
mix,amount (0-1)
MIX: Amount of delayed signal in mix - 0 is dry; 1 is 100% (=original)
1,0,1,0,100,50,1,2,0,0.5,1,0.5
feedback, (-1 to +1)
FEEDBACK: Amount of delayed signal fed back to create multiple echoes/ resonance
1,0,1,-100,100,0,1,2,-1,0,1,0
tail,secs
TAIL:  time to allow delayed signal to decay to zero
1,0,1,0,3000,0,1,2,0,15,30,0
-pprescale,multiplier
PRESCALE: Scale input level to avoid overload  (0.000031 to 1.0)
0,0,1,1,100,100,1,2,0.01,0.5,1,1
-sseed,no.
SEED: Seed no. for random LFO freq; >0 gives reproducible output (with same seed)
0,0,1,0,250,0,0,0,0,125,250,0
lfo mod,0-1
LFO MOD Modulation Depth: range of delay variation sweep (Range: 0 to 1)
1,0,1,0,100,0,1,2,0,0.5,1,0
lfo freq,Hz
LFO FREQ: Frequency of delay variation sweep; negative values give random oscillations.
1,0,1,-5000,5000,0,1,2,-50.0,0,50.0,0
lfo phase,0-1
LFO PHASE: Start-phase of the delay variation sweep (Range: 0 to 1)
1,0,1,0,100,0,1,2,0,0.5,1,0
lfo delay,secs
LFO DELAY: Time before delay variation sweep begins (0-filelength secs)
1,0,3,0,1000,0,1,2,0,0,0,0

[123],2,13,0,extend,drunk,Splice together randomly-chosen segments
1,Drunken walk,Segments chosen randomly from within range either side of given position
1,2,3,4,5,-8,-9,-10,-11
2,Sober at holds,Segments chosen randomly as in Mode 1 but plays soberly at holds
1,2,3,4,5,6,7,-8,-9,-10,-11,-12,-13
duration,secs
DURATION: Minimum length of output soundfile (0-32767 secs). SET THIS FIRST IF POSS.
1,0,1,0,10000,100,1,1,0,500,1000,10
starttime,secs
START-TIME ('locus'): of segment read, allowing for STEP. (Range: 0 to file-length secs; T-V.)   
1,1,3,0,1000,0,1,2,0,0,0,0
halfrange,+/- secs
HALFRANGE ('ambitus'): Half-width of time-range within which segments are read.
1,1,3,0,1000,0,1,2,0,0,0,0.002
step,secs
STEP: Maximum random step between segment reads; next start-point is START+STEP (0.002 to file-length secs)
1,1,3,2,1000,2,1,2,0.002,0,0,0.002
clock,secs
CLOCK: time between reads (= segment size; slower = a longer read) (secs: > splicelen x 2; T-V)
1,1,3,4,100,4,1,2,0.04,0,0,0.04
mindrunk,clockticks
MINDRUNK: Min no. of clockticks between sober plays (1 - 32767: Default 10)
1,1,1,1,1000,10,0,0,1,500,1000,10
maxdrunk,clockticks
MAXDRUNK: Max no. of clockticks between sober plays (1 - 32767: Default 10)
1,1,1,1,1000,10,0,0,1,500,1000,10
-ssplice,  msecs
SPLICE: Length of splice slope (1.0 to filelength/2 ms Default: 15msecs)
0,0,1,1,5000,150,1,1,1,250,500,15
-cRandclock,(0 to 1)
RANDCLOCK: Randomise clock ticks (ie segment size) (Range: 0 to 1 Default: 0)
0,1,1,0,100,0,1,2,0,0.5,1,0
-ooverlap,(0 to 0.99)
Overlap segments in output (Range: 0 to 0.99 Default: 0)
0,1,1,0,99,0,1,2,0,0.5,0.99,0
-rseed,number
SEED: Same seed-number produces identical output on rerun. Default:0 (random sequence different every time)
0,0,1,0,1000,0,0,0,0,500,1000,0
-llosober,secs
Min. duration of sober plays. Range:>0 filelength secs. (If >= file-length, sober plays to end of source)
0,1,3,1,1000,1000,1,2,0,0,0,0
-hhisober,secs
Max. duration of sober plays. Range: >0- >filelength secs. (If >= file-length, sober plays to end of source)
0,1,3,1,1000,1000,1,2,0,0,0,0

[1401],1,10,1,grain,r_extend,Timestretch iterated sounds like spoken 'rrr'
1,Stretch iteration,Timestretch iterated sounds like rolled 'rrr' in speech
1,2,5,6,7,8,9,10,-31
start,secs
Start-time of the iterated material within the soundfile
1,0,3,0,1000,0,1,2,0,0,0,0
end,secs
End-time of the iterated material within the soundfile (>start)
1,0,3,0,1000,0,1,2,0,0,0,x
gate,level
GATE: minimum level in soundfile for envelope tracing to kick in (0-1).
1,0,1,0,1000,0,1,2,0,0.5,1,0
unitsize,msecs
UNITSIZE: size of unit searched for, in ms (15 for rolled rr).
1,0,3,0,0,15,0,0,0,0,0,15
tstretch,multiplier
TSTRETCH: How much to time-stretch the iterated segment (Range:1 to 32767)
1,0,1,10,10000,10,1,2,1,500,1000,1
pchrange,octaves
PCHRANGE: Guess pitch-range of iteration (ie freq.of roll itself) (8ves: try 1).
1,0,1,100,400,100,1,2,1,2,4,1
repeats,number
REPEATS: Number of adjacent copies of any segment(eg 1 or 2): extension uses randomised segments (Range 1-4)
1,0,1,1,4,1,0,0,1,2,4,1
iterations,number
ITERATIONS: Guess approx.number of iterations in source segment (1-32767)
1,0,1,1,500,3,0,0,1,250,500,3
ampscatter, 0-1
AMP SCATTER: random amplitude variation of output segments (Range 0-1)
1,1,1,0,1000,0,1,2,0,0.5,1,0
pchscatter,semitones
PCH SCATTER: random pitch variation (up or down)of output segments (Range 0-24 semitones)
1,1,1,0,2400,0,1,2,0,12,24,0
-x,extension only
OPTION: Keep only the extension i.e. the expanded iterative portion

[199],7,21,2,modify, ,Granular reconstruction of soundfile
brassage 1,Pitch Shift,Shift the pitch while retaining the same (approx) duration
7
brassage 2,Time Stretch,Stretch or compress sound in time while retaining the same pitch
1
brassage 3,Reverb,Create reverberant effect within timeframe of RANGE
3,17,9,-18
brassage 4,Scramble,Randomly reorder grains within timeframe of RANGE
5,-18
brassage 6,GRAIN, All parameters as single values (no ranges)
1,3,5,7,9,11,13,15,-18,-19,-20,-21,-31,-32
brassage 7,WHOLE-GRAIN,All parameters plus optional ranges of values: randomised within limits set
1,3,2,4,5,7,9,11,13,15,6,8,10,12,14,16,-18,-19,-20,-21,-31,-32
sausage,MULTI-GRAIN,As WHOLE-GRAIN but with multi-file input
1,3,2,4,5,7,9,11,13,15,6,8,10,12,14,16,-18,-19,-20,-21,-31,-32
velocity,factor
VELOCITY: "Timestretch" factor: >1 is faster/shorter; <1 is slower/longer.
1,1,2,-10000,10000,0,1,3,0.001,1,1000,1.0
velo hi,top of range
VELOCITY - TOP OF RANGE: timestretch: >1 is faster/shorter; <1 is slower/longer
1,1,2,-10000,10000,0,1,3,0.001,1,1000,1.0
density,factor
Grain overlap: <1 gives inter-grain silence; avoid very small values. MODE 3 range: 2-16384
1,1,2,-1000,1000,0,1,2,0.01,1,1000,1.0
density hi,top of range
DENSITY - TOP OF RANGE: grain overlap; <1 gives inter-grain silence.
1,1,2,-1000,1000,0,1,2,0.01,1,1000,1.0
grainsize,msecs
GRAINSIZE: Length of grains; must be > twice length of splices. (2-sndfile-length; default 50ms.)
1,1,3,2,10000,50,0,0,2,5000,10000,50
grnsize hi,top of range
GRAIN SIZE - TOP OF RANGE: length of grains; >=grainsize (2-sndfile-length; default 50ms.)
1,1,3,2,10000,50,0,0,2,5000,10000,50
pitchshift,semitones
PITCH SHIFT: Transposition of grains in (fractions of) semitones
1,1,1,-10000,10000,0,1,2,-100,0,100,0
pchshift hi,top of range
PITCH SHIFT - TOP OF RANGE: transposition (semitones).
1,1,1,-10000,10000,0,1,2,-100,0,100,0
amp,factor
AMP: Gain (loudness) applied to grains (Range: 0 to 1; Default: 1.0)
1,1,1,0,100,100,1,2,0,0.5,1,1
amp hi,top of range
AMP - TOP OF RANGE: gain (Range: 0 to 1).
1,1,1,0,100,100,1,2,0,0.5,1,1
space,0-1
SPACE: Stereo position in outfile (0 = L to 1 = R). Stereo inputs are pre-mixed to mono.
1,1,1,0,100,50,1,2,0,0.5,1,0.5
space hi,top of range
SPACE - TOP OF RANGE: Stereo (pan) position (0 = L to 1 = R).
1,1,1,0,100,50,1,2,0,0.5,1,0.5
startsplice,msecs
START SPLICE: Length of start-splices on grains in ms (1-1548; Default: 5)
1,1,1,1,500,5,0,0,1,250,500,5
startspl hi,top of range
START SPLICE - TOP OF RANGE: Splice length at start of grains (1-1548; Default: 5).
1,1,1,1,500,5,0,0,1,250,500,5
endsplice,msecs
END SPLICE: Length of end-splices on grains in ms (1-1548; Default: 5)
1,1,1,1,500,5,0,0,1,250,500,5
endsplice hi,top of range
END SPLICE - TOP OF RANGE: Splice length at end of grains (1-1548; Default: 5).
1,1,1,1,500,5,0,0,1,250,500,5
pitch trans,factor
PITCH TRANS: Transposition factor for Reverb (Range: -0.33 to 0.33)
1,1,1,-330,330,0,1,2,-0.33,0,0.33,0
-rrange,msecs
RANGE: limit of search for next grain, before infile 'now' (Default: 0 ms; must be >0 for Modes 3 and 4)
0,1,3,0,1000,0,0,0,0,0,0,0
-jjitter,0-1
JITTER: Randomisation of grain position (Range 0-1) Default (0.50).
0,1,1,0,100,50,1,2,0,0.5,1,0.5
-loutlength,secs
OUTFILE LENGTH: maximum length - only needed if velocity very low or = 0.
0,0,1,0,3000,0,1,1,0,150,300,0
-conechan,1(L)/2(R)
ONE-CHANNEL: Process only 1 channel of stereo;  N/A to Soundshaper. (Range 1L,2R).
0,0,1,1,2,1,0,0,1,1,2,1
-x,Exponential splices
EXPONENTIAL: Use exponential instead of linear splices
-n,No pitch interpol'n
OPTION: No interpolation between different pitches (NOT RECOMMENDED).

[1992],1,22,2,wrappage,wrappage,Multi-channel granular reconstruction (M-C out)
0,WHOLE-GRAIN,Multi-channel grain c.f. WHOLE-GRAIN; can have more than one input
2,1,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,-22,-31,-32
outchans,number
OUTCHANS: number of output channels (2-16)
1,0,1,2,16,4,0,0,2,8,16,4
centre,chan_no
CENTRAL chan. position (0-OUTCHANS); <1 betw. last and 1st chan; T-V file: TIME CENTRE DIRECTION (+/-1)
1,1,1,0,160,20,1,2,0,8,16,2
spread,chans
SPREAD: Width of spatialisation around CENTRE channel (0-OUTCHANS channels; T-V).
1,1,1,0,160,40,1,2,0,8,16,4
depth,chans
DEPTH:  No. of chans with sound, behind leading edges of spread (always forced to <= 1/2 of SPREAD).
1,1,1,20,160,20,1,2,2,8,16,2
velocity,factor
VELOCITY: "Timestretch" factor: >1 is faster/shorter; <1 is slower/longer.
1,1,2,-10000,10000,0,1,3,0.001,1,1000,1.0
velo hi,top of range
VELOCITY - TOP OF RANGE: timestretch: >1 is faster/shorter; <1 is slower/longer
1,1,2,-10000,10000,0,1,3,0.001,1,1000,1.0
density,factor
DENSITY: Grain overlap; <1 gives inter-grain silence; avoid very small values.
1,1,2,-1000,1000,0,1,2,0.01,1,1000,1.0
density hi,top of range
DENSITY - TOP OF RANGE: grain overlap; <1 gives inter-grain silence.
1,1,2,-1000,1000,0,1,2,0.01,1,1000,1.0
grainsize,msecs
GRAINSIZE: Length of grains; must be > twice length of splices. (2-sndfile-length; default 50ms.)
1,1,3,2,10000,50,0,0,2,5000,10000,50
grnsize hi,top of range
GRAIN SIZE - TOP OF RANGE: length of grains; >=grainsize (2-sndfile-length; default 50ms.)
1,1,3,2,10000,50,0,0,2,5000,10000,50
pitchshift,semitones
PITCH SHIFT: Transposition of grains in (fractions of) semitones
1,1,1,-10000,10000,0,1,2,-100,0,100,0
pchshift hi,top of range
PITCH SHIFT - TOP OF RANGE: transposition (semitones).
1,1,1,-10000,10000,0,1,2,-100,0,100,0
amp,factor
AMP: Gain (loudness) applied to grains (Range: 0 to 1; Default: 1.0)
1,1,1,0,100,100,1,2,0,0.5,1,1
amp hi,top of range
AMP - TOP OF RANGE: gain (Range: 0 to 1).
1,1,1,0,100,100,1,2,0,0.5,1,1
startsplice,msecs
START SPLICE: Length of start-splices on grains in ms (1-1548; Default: 5)
1,1,1,1,500,5,0,0,1,250,500,5
startspl hi,top of range
START SPLICE - TOP OF RANGE: Splice length at start of grains (1-1548; Default: 5).
1,1,1,1,500,5,0,0,1,250,500,5
endsplice,msecs
END SPLICE: Length of end-splices on grains in ms (1-1548; Default: 5)
1,1,1,1,500,5,0,0,1,250,500,5
endsplice hi,top of range
END SPLICE - TOP OF RANGE: Splice length at end of grains (1-1548; Default: 5).
1,1,1,1,500,5,0,0,1,250,500,5
range,msecs
RANGE: limit of search for next grain, before infile 'now' (Default: 0 ms)
1,1,3,0,1000,0,0,0,0,0,0,0
jitter,0-1
JITTER: Randomisation of grain position (Range 0-1) Default (0.50).
1,1,1,0,100,50,1,2,0,0.5,1,0.5
outlength,secs
OUTFILE LENGTH: maximum length if end of data not reached (needed if velocity very low).
1,0,1,0,3000,0,1,1,0,150,300,300
-bmult,multiplier
MULT: enlarge output buffer. (Long silences in output may require larger buffer.)
0,0,1,10,100,10,1,2,1,5,10,1
-e,Exponential splices
EXPONENTIAL: Use exponential instead of linear splices
-o, outfile times
OUTFILE TIMES  -- used for all params except velocity (UNSET: params relative to time in INPUT file)

[2395],1,11,1,newsynth,synthesis,Synthesis with fractally arrayed spikes 
4,Fractal synthesis,Wavelength = grouplength (on+off+on+off) + trailing silence
1,2,3,4,6,5,7,8,9,-10,-11,-31
sample rate,hertz
SAMPLE RATE: (Hz) Val: 48000, 24000, 44100, 22050, 32000, or 16000 (?)
1,0,1,16000,48000,44100,0,0,16000,24000,48000,44100
outlength,secs
OUTLENGTH: Duration of output soundfile (0.04 to 7200 seconds)
1,0,1,10,30000,1000,1,2,0.1,150,300,10
frequency,hertz
FREQUENCY of output soundfile (0.001-10000 Hz)
1,1,2,-100000,100000,0,1,2,0.01,1000,10000,1000
spikeatk, samples
SPIKEATK: Length of spike attack (0-16 samples)
1,0,1,0,16,1,0,0,0,8,16,1
spikedec, samples
SPIKEDEC: Length of spike decay (0-64 samples)
1,0,1,0,64,8,0,0,0,32,64,8
envrise, shape
ENVRISE: Rise curve of attack (0.25 to 4.0; <1 slow->fast; >1 fast->slow)
1,0,1,25,400,100,1,2,0.25,2,4,1
envdecay, shape
ENVDECAY: Fall curve of envelope decay (0.25 to 4.0; <1 slow->fast; >1 fast->slow)
1,0,1,25,400,100,1,2,0.25,2,4,1
onratio,0-1
ONRATIO: Ratio of ON-time to OFF-time (in 1/2-grouplength) 
1,1,1,10,100,50,1,2,0.1,0.5,1,0.5
grpratio,0-1
GRPRATIO: Ratio of group-length to total-wavelength
1,1,1,10,100,50,1,2,0.1,0.5,1,0.5
-ffractlevl,0-1
FRACTLEVL: level at which +ve and -ve values switched
0,0,1,0,2560,100,1,1,0,128,256,10
-rrand,0-1
RAND: 2nd 'ON' placed randomly between true position & grouplength-end.
0,1,1,0,100,0,1,2,0,0.5,1,0
-e,subdivide at end
OPTION: Places 2nd "a" at end of grouplength (NOT WITH RAND!)

[301],1,12,1, ,reverb,Multi-channel reverberation (M/S in, S/MCH out)
0,Reverb,Reverberation unit with stereo or multi-channel output
1,2,3,4,5,6,-7,-8,-9,-10,-11,-12,-31
earlygain,level
EARLYGAIN: Level of early reflections (Range: 0.0 to 1.0)
1,0,1,0,99,50,1,2,0,0.5,0.99,0.5
mix,balance
MIX: Balance of wet(reverb) to dry(source). (Range: 0.0 wet to 1.0 dry)
1,0,1,0,99,50,1,2,0,0.5,0.99,0.5
revb time,secs
REVB: Reverberation time (how long to decay by 60dB) in secs.
1,0,2,-1000,1000,0,1,2,0.01,1,100,1
absorb,value
ABSORB: Degree of high freq. damping. Range: 0.0 (none/off) to 1.0; typically 0.3 (hard surface) to 0.7 (soft)
1,0,1,0,99,0,1,2,0,0.5,0.99,0
lowpass,Hz
LOWPASS: Lowpass filter cutoff freq applied at input to reverb. (Range: 0-14700 Hz; 0 = off)
1,0,1,0,14700,0,0,0,0,7350,14700,0
trail,secs
TRAIL: Extra time added to outfile for reverb tail (secs)
1,0,1,0,1000,50,1,2,0,50,100,5
delaytimes,DATAFILE
DELAYTIMES: List of delay times (msecs) for 6 comb and 4 allpass filters
0,9,0,0,2000,0,0,0,0,1000,2000,0
-cchannels,number
CHANNELS: Number of channels in outfile. (Range: 1-16; default 2) 
0,0,1,1,16,2,0,0,1,8,16,2
-eearlyref,DATAFILE
EARLYREF: Breakpoint file of early reflections created by ROOMRESP program
0,6,1,0,1000,0,1,2,0,0.5,1,0
-Hhighcut,Hz
HIGHCUT: Cut-off freq. of high-cut filter applied to infile (6dB/8ve)
0,0,1,0,20000,0,0,0,0,10000,20000,0
-Llowcut,Hz
LOWCUT: Cut-off freq. of low-cut filter applied to infile (12dB/8ve)
0,0,1,0,20000,0,0,0,0,10000,20000,0
-ppredelay,msecs
PREDELAY: Force reverb. pre-delay; shifts early reflections (Range: 0-2000 ms.)
0,0,1,0,200,0,0,0,0,100,200,0
-f,Floating point out
OPTION: Floating-point output (default: as infile).

[302],1,12,2, ,rmverb,Multi-channel reverberation with room simulation (M/S in, S/MCH out)
0,Reverb,Simulate reverberation in a room with stereo of m-c output
1,2,3,4,5,6,7,-8,-9,-10,-11,-12,-31,-32
roomsize,1-3
ROOMSIZE: Size of room: 1 - SMALL, 2 - MEDIUM or 3 - LARGE
1,0,1,1,3,1,0,0,1,2,3,1
earlygain,level
EARLYGAIN: Level of early reflections (Range: 0.0 to <1.0)
1,0,1,0,99,50,1,2,0,0.5,0.99,0.5
mix,balance
MIX: Balance of wet(reverb) to dry(source). (Range: 0.0 wet to <1.0 dry)
1,0,1,0,99,50,1,2,0,0.5,0.99,0.5
feedback,+/-
FEEDBACK: Proportion of sound fed back to input; determines length of decay (Range: -1 to +1)
1,0,1,-100,100,0,1,2,-1,0,1,0
absorb,value
ABSORB: Degree of high freq. damping. Range: 0.0 (none/off) to 1.0; typically 0.3 (hard surface) to 0.7 (soft)
1,0,1,0,99,0,1,2,0,0.5,0.99,0
lowpass,Hz
LOWPASS: Lowpass filter cutoff freq applied at input to reverb. (Range: 0-14700 Hz; 0 = off)
1,0,1,0,20000,0,0,0,0,10000,20000,0
trail,secs
TRAIL: Extra time added to outfile for reverb tail (secs)
1,0,1,0,1000,50,1,2,0,50,100,5
-cchannels,number
CHANNEL: Number of channels in outfile. (Range: 1-16; default 2) 
0,0,1,1,16,2,0,0,1,8,16,2
-eearlyref,DATAFILE
EARLYREF: Breakpoint file of early reflections created by ROOMRESP program
0,6,1,0,1000,0,1,2,0,0.5,1,0
-Hhighcut,Hz
HIGHCUT: Cut-off freq. of high-cut filter applied to infile (6dB/8ve)
0,0,1,0,20000,0,0,0,0,10000,20000,0
-Llowcut,Hz
LOWCUT: Cut-off freq. of low-cut filter applied to infile (12dB/8ve)
0,0,1,0,20000,0,0,0,0,10000,20000,0
-ppredelay,msecs
PREDELAY: Force reverb. pre-delay; shifts early reflections (Range: 0-2000 ms.)
0,0,1,0,200,0,0,0,0,100,200,0
-d,Double damping
Apply double lowpass damping(see ABSORB).Reduces reverb time;increase feedback to compensate.
-f,Floating point out
OPTION: Floating-point output (default: as infile).

[304],1,13,0, ,rmresp,Generate Early-reflections for REVERB/ROOMVERB/TAPDELAY (DATAFILE OUT)
0,Room response,Generate early-reflections data (datafile earlyref.brk sent to User Folder)
1,2,3,4,5,6,7,8,9,10,11,-12,-13
liveness,0-1
LIVENESS: degree of reflection from each surface (0 to 1; typical: 0.95)
1,0,1,0,100,95,1,2,0.0,0.5,1.0,0.95
reflections,number
REFLECTIONS: Number of reflections from each surface (normally > 0; typically: 2-5)
1,0,1,0,10,2,0,0,0,5,10,2
RoomL,metres
ROOML: Room length (metres)
1,0,1,0,5000,100,1,2,0,25,50,1
ROOMW,metres
ROOMW: Room width (metres)
1,0,1,0,5000,100,1,2,0,25,50,1
RoomH,metres
ROOMH: Room height (metres)
1,0,1,0,5000,100,1,2,0,25,50,1
SourceL,metres
SOURCEL: Position of source sound - length (metres) (must be <= Room length!)
1,0,1,0,5000,100,1,2,0,25,50,1
SourceW,metres
SOURCEW: Position of sound source - width (metres) (must be <= Room width!)
1,0,1,0,5000,100,1,2,0,25,50,1
SourceH,metres
SOURCEH: Position of source sound - height (metres) (<= Room height!)
1,0,1,0,5000,100,1,2,0,25,50,1
ListenerL,metres
LISTENERL: Position of listener - length (metres) (<= Room length!)
1,0,1,0,5000,100,1,2,0,25,50,1
ListenerW,metres
LISTENERW: Position of listener - width (metres)  (<= Room width!)
1,0,1,0,5000,100,1,2,0,25,50,1
ListenerH,metres
LISTENERH: Position of listener - height (metres) (<= Room height!)
1,0,1,0,5000,100,1,2,0,25,50,1
-aMaxamp,level
MAXAMP: Peak amplitude for data (0 to 1; default 1.0)
0,0,1,0,100,100,1,2,0.0,0.5,1.0,1.0
-rResolutn,msecs
RESOLUTION: Time resolution for reflections in msecs (0.1 to 2; default 0.1)
0,0,1,10,200,10,1,2,0.1,1.0,2.0,0.1

[274],1,11,0,envnu,peakchop,Gate sound around peaks and adjust playback tempo.
1,Peak chop,Isolate signal around peaks and replay at specified tempo
1,2,3,4,5,-6,-7,-8,-9,-10,-11
window,msecs
Envelope WINDOW: window size for extracting envelope (1-64ms default 50)
1,0,1,1,64,50,0,0,1,32,64,50
peakwidth,msecs
PEAKWIDTH: width of retained peaks; < min distance betw. peaks (1-1000 ms; default 20) 
1,1,1,1,100,20,0,0,1,50,100,20
rise_time,msecs
RISETIME: from zero to peak (1-200 ms; default 10)
1,1,1,1,64,10,0,0,1,32,64,10
tempo,bpm
TEMPO of resulting output, MM/BPM = events per minute (Range 20-3000) 
1,1,1,200,6000,1200,1,2,20,300,600,120
gain,level
GAIN: overall level; lower this if rapid tempo causes peaks to overlap (0-1, default 1)
1,1,1,0,1000,1000,1,2,0,0.5,1,1
-ggate,level
GATE: level (relative to max) below which peaks ignored (0-1, default 0)
0,0,1,0,100,10,1,2,0,0.5,1,0.10
-qskew,0-1
SKEW envelope centring on peak (0-1; peak at envelope start(=0)/end (=1),centred=0.5; default 0.25)  
0,0,1,0,100,25,1,2,0,0.5,1,0.25
-sscatter,0-1
SCATTER: randomize output times (0-1, default 0)
0,1,1,0,100,0,1,2,0,0.5,1,0
-nnormalize,0-1
NORMALIZE: force peak-event levels towards that of loudest (0-1, default 0)
0,1,1,0,100,0,1,2,0,0.5,1,0
-rrepeats,number
REPEATS: number of times peak events are repeated (0-256, default 0; 1 = play twice)
0,1,1,0,256,0,0,0,0,128,256,0
-mmiss,number
MISS: use peak event, skip next 'miss' peak events (0-64, default 0)
0,1,1,0,64,0,0,0,0,32,64,0 



[1892],2,12,0,filtrage,filtrage,Generate random-freq filterbank data
1,Fixed filter,Generate a fixed filter data file
1,2,3,4,5,6,7,8,9,-12
2,Vari filter,Generate a time-varying filter data file
1,2,3,4,5,6,7,8,9,10,11,-12
duration,secs
DURATION spanned by output filter file (Range: 0-32767 secs)
1,0,1,0,30000,1000,1,2,0,150,300,10
filters,number
FILTERS: number of parallel filters in the filterbank (Range: 2-400)
1,0,1,2,400,2,0,0,2,200,400,2
pitch min,MIDI
PITCH MIN: Minimum pitch in range (MIDI: 0-127)
1,0,1,0,12700,1000,1,2,0,64,127,10
pitch max,MIDI
PITCH MAX: Maximum pitch in range (MIDI: 0-127)
1,0,1,0,12700,10000,1,2,0,64,127,100
distrib,range
DISTRIB Distribution of pitch values: 1=linear; <1 / >1: squeezed towards high / low pitches 
1,0,2,-1000,1000,0,1,2,0.1,1,10,1
pch rand,0-1
PCH RAND: Degree of randomisation of filter pitches (Range: 0-1)
1,0,1,0,1000,500,1,2,0,0.5,1,0.5
amp min,0-1 
AMP MIN: Minimum filter amplitude (Range: 0-1; max = 1.0)
1,0,1,0,1000,500,1,2,0,0.5,1,0.5
amp rand,0-1
AMP RAND: Degree of randomisation of filter amplitudes (Range: 0-1)
1,0,1,0,1000,500,1,2,0,0.5,1,0.5
amp distrib,-1 to +1
AMPLITUDE DISTRIBUTION -1/+1: Decreasing/increasing with pitch; 0: Random; other vals: decreasing randomisation.
1,0,1,-100,100,0,1,2,-1.0,0,1.0,0
timestep,secs
TIMESTEP: Timestep between each specified set of filter-pitches (>0 secs); 1st time is 0.0.
1,0,1,0,6000,100,1,2,0,30,60,1
timerand,0-1
TIMERAND:   Randomisation of timestep (0-1).
1,0,1,0,1000,0,1,2,0,0.5,1,0
-sseed,number
SEED: Same seed-number produces identical randomisation on rerun.(0-512; default 0: random sequence)
0,0,1,0,512,0,1,2,0,256,512,0

[2183],2,28,2,fracture,fracture,Fragment sound and scatter in multi-channel space (M-C out)
1,N-Chan dispersal,Output is N-channel dispersal in N-channel space.
1,2,3,4,5,6,-11,-12,-13,-14,-15,-16,-17,-18,-19,-20,-31,-32
2,Stereo dispersal,Output is stereo dispersal (possibly moving) in surround space (min. 4 chans).
1,2,3,4,5,6,7,8,9,10,-11,-12,-13,-14,-15,-16,-17,-18,-19,-20,-21,-22,-23,-24,-25,-26,-27,-28,-31
etab,datafile
ETAB:file; lines of Time +7 pairs of: etime (relative time within envelope)(0-1) & level(0-1)
1,4,0,0,0,0,0,0,0,0,0,0
outchans,number
OUTCHANS: Number of output channels (2-16; Mode 2: multiples of 4 only).
1,0,1,2,16,4,0,0,2,8,16,4
streams,number
STREAMS: No. of spatial positions (streams) for resulting fragments (4-512).
1,0,1,4,512,4,0,0,4,256,512,4
pulse,secs
PULSE: average gap betwen one set of fragments (each in different stream) the next (secs).
1,1,3,0,1000,50,1,2,0,0,0,0.5
envdepth,factor
Depth that envelope cuts down to: 1=zero; 0.5=1/2 way, etc; >1 stacks fragments (see Usage).
1,1,2,-100,800,1,1,2,0.01,1.0,8.0,1.0
stackint,semitones
STACKINT: stack transposition interval (0-12 semitones; 0 read as 8ve. NO ZEROS in brkpoint files.)
1,1,1,0,1200,0,1,2,0,6,12,0
centre,chan
CENTRE: Channel from which stereo-image spreads out (1-OUTCHANS max. 16)
1,1,1,1,16,1,0,0,1,8,16,1
front,+/1
FRONT: Output leading edge: 1=in centre chan; -1=in chan.opposite; 0=bisect entire N-chan. space.
1,1,1,-40,20,10,1,2,-4,1,2,1
depth,propn
DEPTH: maximum fraction of all output chans turned on, behind front.
1,1,1,0,100,0,0,0,0,0.5,1.0,0.5
rolloff,level
ROLLOFF: fall in level as signal spread over several chans. Range 0-1; 1=level div. by no. of chans.
1,1,1,0,100,10,1,2,0,0.5,1.0,0.1
-hseed,number
SEED: If > zero, repeating process with same seed gives identical output.
0,0,1,0,1000,0,0,0,0,500,1000,0
-mmindur,secs
MINDUR: minimum duration of fragments (secs; zero = no minimum).
0,1,3,0,1000,0,1,2,0,0,0,0
-imaxdur,secs
MAXDUR: maximum duration of fragments (secs; 0= no maximum; 1 scatters in range +/- 1/2 pulse-duration).
0,1,3,0,1000,0,1,2,0,0,0,0
-rreadrand,0-1
READRAND: Randomisation of read-time in source (0-1).
0,1,1,0,100,0,1,2,0,0.5,1.0,0
-ppulserand,0-1
PULSERAND: Randomisation of pulse-time in output (0-1).
0,1,1,0,100,0,1,2,0,0.5,1.0,0
-ddisp,0-1 
DISP: Dispersal (scatter) of output timings between different streams (0-1)
0,1,1,0,100,0,1,2,0,0.5,1.0,0
-vlevrnd,0-1
LEVRAND: Randomize fragment levels (0-1).
0,1,1,0,100,0,1,2,0,0.5,1.0,0
-eenvrand,0-1
ENVRAND: Randomize envelope time range (0-1)
0,1,1,0,100,0,1,2,0,0.5,1.0,0
-sstackrand,0-1
STACKRAND: Randomize stack value S (S=DEPTH-1). 0: Stack value=S  1: rand.val. 0-S  
0,1,1,0,100,0,1,2,0,0.5,1.0,0
-ttransrand,cents
TRANSRAND: Randomize transposition of fragments. (0-1200 cents = 1 8ve; pitch is 0 to +/- TRANSRAND)
0,1,1,0,1200,0,1,2,0,600,1200,0
-aatten,factor
ATTEN: Level attenuation factor for distance, or sound fade-out. (Range 1-10: 1 = linear).
0,0,1,100,1000,100,1,2,1.0,5.0,10.0,1.0
-zzpoint,0-1
ZPOINT: Point where image subtends zero angle(mono): 0=circle edge, 1=infinity 
0,0,1,0,999,0,1,2,0,0.5,0.999,0
-ccontract,0-1
CONTRACT: Contraction factor narrowing distant image width (0-1 : 1= linear). 
0,0,1,0,1000,0,1,2,0,0.5,1.0,0
-llowpoint,0-1
LOW_POINT: Distance where lopass-filtering is total (0=circle edge, 1=infinity.
0,0,1,0,999,0,1,2,0,0.5,0.999,0
-ffmix,0-1 
Factor for mixing lopass-filtered signal into original, with distance (0-1).
0,0,1,0,1000,0,1,2,0,0.5,1.0,0
-jfilt freq,freq 
Lo-pass filter cut-off frequency.(Range: 10 to 8820 Hz)
0,0,1,10,14700,1000,0,0,10,4410,8820,1000
-kup,0-1 
UP (if NOT 0): proportion of overall dur over which event fades from 0.
0,0,1,0,100,0,1,2,0,0.5,1.0,0
-wdown,0-1 
DOWN (if NOT 0): proportion of overall dur over which event fades to 0.
0,0,1,0,100,0,1,2,0,0.5,1.0,0
-y,Stack short events       
OPTION: Permit stacking of very short events. Default = forbid to prevent clipping.
-l,Linear chans 
OPTION: Channels arranged linearly with defined left and right ends; default: ring numbering.

[1772],5,11,1,transit,simple,Move repeated sound across 8-channel space (MONO in, M-C MIXFILE OUT)
1,Glancing,Move across central front speaker of ring formation
1,2,3,4,6,-8,-9,-10,-11,-31
2,Edgewise,Move across two front speakers of alternative ring formation
1,2,3,4,6,-8,-9,-10,-11,-31                
3,Crossing,Move from Front L to Front R of ring formation
1,2,3,4,6,-8,-9,-10,-11,-31               
4,Close,Move from Side Front L  to Side Front R of alternative ring formation
1,2,3,4,6,-8,-9,-10,-11,-31
5,Central,Move between central pair (L to R) of ring formation
1,2,3,5,6,-8,-9,-10,-11,-31
focus,integer
FOCUS: Centre chan. of motion. (Range: 1-8. Integer for odd modes; 1.5, 2.5 etc for even modes)
1,0,1,1,8,1,0,0,1,4,8,1
dur,secs
DUR: Duration of motion from edge to centre. (Min: 2 x Infile-length = 2 playings)
1,0,1,1,6000,100,1,2,0.01,30,60,1
steps,number
STEPS: Count of events from edge to centre (ONLY); Range: 2-32767.
1,0,1,2,100,2,0,0,2,50,100,2
maxangle,degrees
MAXANGLE: Maximum angle from centre line reached (degrees: 22.5 to 90).
1,0,1,225,900,450,1,2,22.5,45,90,45
maxdist,value
MAXDIST: Maximum distance from centre reached (1-1000 where halfradius = 1).
1,0,2,-1000,1000,-1000,1,2,1,100,1000,1
dec,attenuation
DEC: Gain reduction on passing from one event to the next (>0 to <1).
1,0,1,1,999,100,1,2,0.001,0.5,0.999,0.1
DUMMY,0-1
DUMMY: Progressive mix-in of infile2 (range 0-1).
1,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-tthresh,level
THRESHOLD: Overall gain at which attenuation starts to increase.
0,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-dmaxlim,level
MAXLIM: Maximum limit (level) of attentuation after threshold reached (> ATTEN).
0,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-eminlim,level
MINLIM: Minimum overall level at which event ends (< THRESH).
0,0,1,0,1000,100,1,2,0,0.5,1.0,0.1
-mmaxdur,secs
MAXDUR: Maximum duration from edge to centre in case MINLIM never reached (Min:2 x Infile; >= DUR).
0,0,1,1,6000,500,1,2,0.01,30,60,5
-l,Left motion
OPTION: Motion from Right to Left; default is Left to Right

[1773],5,11,1,transit,filtered,Move 2 repeated sounds across 8-channel space (MONO in, M-C MIXFILE OUT)
1,Glancing,Move across central front speaker of ring formation
1,2,3,4,6,7,-8,-9,-10,-11,-31
2,Edgewise,Move across two front speakers of alternative ring formation
1,2,3,4,6,7,-8,-9,-10,-11,-31                
3,Crossing,Move from Front L to Front R of ring formation
1,2,3,4,6,7,-8,-9,-10,-11,-31               
4,Close,Move from Side Front L  to Side Front R of alternative ring formation
1,2,3,4,6,7,-8,-9,-10,-11,-31 
5,Central,Move between central pair (L to R) of ring formation
1,2,3,5,6,7,-8,-9,-10,-11,-31
focus,integer
FOCUS: Centre of motion.  (Range: 1-8. Integer for odd modes; 1.5, 2.5 etc for even modes)
1,0,1,1,8,1,0,0,1,4,8,1
dur,secs
DUR: Duration of motion from edge to centre. (Min: 2 x Infile-length)
1,0,1,1,6000,100,1,2,0.01,30,60,1
steps,number
STEPS: Count of events from edge to centre (ONLY); Range: 2-32767.
1,0,1,2,100,2,0,0,2,50,100,2
maxangle,degrees
MAXANGLE: Maximum angle from centre line reached (degrees: 22.5 to 90).
1,0,1,225,900,450,1,2,22.5,45,90,45
maxdist,value
MAXDIST: Maximum distance from centre reached (1-1000 where halfradius = 1).
1,0,2,-1000,1000,-1000,1,2,1,100,1000,1
dec,attenuation
DEC: Gain reduction on passing from one event to the next (>0 to <1).
1,0,1,1,999,100,1,2,0.001,0.5,0.999,0.1
mixin,0-1
MIXIN: Progressive mix-in of infile2 (range 0-1).
1,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-tthresh,level
THRESHOLD: Overall gain at which attenuation starts to increase.
0,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-dmaxlim,level
MAXLIM: Maximum limit (level) of attentuation after threshold reached (0-1; > ATTEN).
0,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-eminlim,level
MINLIM: Minimum overall level at which event ends (0-1; < THRESH).
0,0,1,0,1000,100,1,2,0,0.5,1.0,0.1
-mmaxdur,secs
MAXDUR: Maximum duration from edge to centre in case MINLIM never reached (Min:2 x Infile; >= DUR).
0,0,1,1,6000,500,1,2,0.01,30,60,5
-l,Left motion
OPTION: Motion from Right to Left; default is Left to Right

[1774],5,11,1,transit,doppler,Move 2 or more repeated sounds across 8-channel space (MONO in, M-C MIXFILE OUT)
1,Glancing,Move across central front speaker of ring formation
1,2,3,4,6,-8,-9,-10,-11,-31
2,Edgewise,Move across two front speakers of alternative ring formation
1,2,3,4,6,-8,-9,-10,-11,-31                
3,Crossing,Move from Front L to Front R of ring formation
1,2,3,4,6,-8,-9,-10,-11,-31               
4,Close,Move from Side Front L  to Side Front R of alternative ring formation
1,2,3,4,6,-8,-9,-10,-11,-31 
5,Central,Move between central pair (L to R) of ring formation
1,2,3,5,6,-8,-9,-10,-11,-31
focus,integer
FOCUS: Centre of motion.  (Range: 1-8. Integer for odd modes; 1.5, 2.5 etc for even modes)
1,0,1,1,8,1,0,0,1,4,8,1
dur,secs
DUR: Duration of motion from edge to centre. (Min: 2 x Infile-length)
1,0,1,1,6000,100,1,2,0.01,30,60,1
steps,number
STEPS: Count of events from edge to centre (ONLY); Range: 2-32767.
1,0,1,2,100,2,0,0,2,50,100,2
maxangle,degrees
MAXANGLE: Maximum angle from centre line reached (degrees: 22.5 to 90).
1,0,1,225,900,450,1,2,22.5,45,90,45
maxdist,value
MAXDIST: Maximum distance from centre reached (1-1000 where halfradius = 1).
1,0,2,-1000,1000,-1000,1,2,1,100,1000,1
dec,attenuation
DEC: Gain reduction on passing from one event to the next (>0 to <1).
1,0,1,1,999,100,1,2,0.001,0.5,0.999,0.1
dummy,0-1
DUMMY: Progressive mix-in of infile2 (range 0-1).
1,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-tthresh,level
THRESHOLD: Overall gain at which attenuation starts to increase.
0,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-dmaxlim,level
MAXLIM: Maximum limit (level) of attentuation after threshold reached (0-1; > ATTEN).
0,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-eminlim,level
MINLIM: Minimum overall level at which event ends (0-1; < THRESH).
0,0,1,0,1000,100,1,2,0,0.5,1.0,0.1
-mmaxdur,secs
MAXDUR: Maximum duration from edge to centre in case MINLIM never reached (Min:2 x Infile; >= DUR).
0,0,1,1,6000,500,1,2,0.01,30,60,5
-l,Left motion
OPTION: Motion from Right to Left; default is Left to Right

[1775],5,11,1,transit,doplfilt, Move 4 or more repeated sounds across 8-channel space (MONO in, M-C MIXFILE OUT)
1,Glancing,Move across central front speaker of ring formation
1,2,3,4,6,7,-8,-9,-10,-11,-31
2,Edgewise,Move across two front speakers of alternative ring formation
1,2,3,4,6,7,-8,-9,-10,-11,-31                
3,Crossing,Move from Front L to Front R of ring formation
1,2,3,4,6,7,-8,-9,-10,-11,-31               
4,Close,Move from Side Front L  to Side Front R of alternative ring formation
1,2,3,4,6,7,-8,-9,-10,-11,-31 
5,Central,Move between central pair (L to R) of ring formation
1,2,3,5,6,7,-8,-9,-10,-11,-31
focus,integer
FOCUS: Centre of motion.  (Range: 1-8. Integer for odd modes; 1.5, 2.5 etc for even modes)
1,0,1,1,8,1,0,0,1,4,8,1
dur,secs
DUR: Duration of motion from edge to centre. (Min: 2 x Infile-length)
1,0,1,1,6000,100,1,2,0.01,30,60,1
steps,number
STEPS: Count of events from edge to centre (ONLY); Range: 2-32767.
1,0,1,2,100,2,0,0,2,50,100,2
maxangle,degrees
MAXANGLE: Maximum angle from centre line reached (degrees: 22.5 to 90).
1,0,1,225,900,450,1,2,22.5,45,90,45
maxdist,value
MAXDIST: Maximum distance from centre reached (1-1000 where halfradius = 1).
1,0,2,-1000,1000,-1000,1,2,1,100,1000,1
dec,attenuation
DEC: Gain reduction on passing from one event to the next (>0 to <1).
1,0,1,1,999,100,1,2,0.001,0.5,0.999,0.1
mixin,0-1
MIXIN: Progressive mix-in of infile2 (range 0-1).
1,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-tthresh,level
THRESHOLD: Overall gain at which attenuation starts to increase.
0,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-dmaxlim,level
MAXLIM: Maximum limit (level) of attentuation after threshold reached (0-1; > ATTEN).
0,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-eminlim,level
MINLIM: Minimum overall level at which event ends (0-1; < THRESH).
0,0,1,0,1000,100,1,2,0,0.5,1.0,0.1
-mmaxdur,secs
MAXDUR: Maximum duration from edge to centre in case MINLIM never reached (Min:2 x Infile; >= DUR).
0,0,1,1,6000,500,1,2,0.01,30,60,5
-l,Left motion
OPTION: Motion from Right to Left; default is Left to Right

[1776],5,5,1,transit,sequence,Move sequence of repeated sounds across 8-channel space (MONO in, M-C MIXFILE OUT)
1,Glancing,Move across central front speaker of ring formation
1,2,3,5,-31
2,Edgewise,Move across two front speakers of alternative ring formation
1,2,3,5,-31                
3,Crossing,Move from Front L to Front R of ring formation
1,2,3,5,-31               
4,Close,Move from Side Front L  to Side Front R of alternative ring formation
1,2,3,5,-31 
5,Central,Move between central pair (L to R) of ring formation
1,2,4,5,-31
focus,integer
FOCUS: Centre of motion. (Range: 1-8. Integer for odd modes; 1.5, 2.5 etc for even modes)
1,0,1,1,8,1,0,0,1,4,8,1
dur,secs
DUR: Duration of motion from edge to centre. (Min: 2 x Infile-length)
1,0,1,1,6000,100,1,2,0.01,30,60,1
maxangle,degrees
MAXANGLE: Maximum angle from centre line reached (degrees: 22.5 to 90).
1,0,1,225,900,450,1,2,22.5,45,90,45
maxdist,value
MAXDIST: Maximum distance from centre reached (1-1000 where halfradius = 1).
1,0,2,-1000,1000,-1000,1,2,1,100,1000,1
dec,attenuation
DEC: Gain reduction on passing from one event to the next (>0 to <1).
1,0,1,1,999,100,1,2,0.001,0.5,0.999,0.1
-l,Left motion
OPTION: Motion from Right to Left; default is Left to Right

[2220],5,11,1,transit,simple,Move repeated sound across 8-channel space (MONO in, M-C  OUT)
1,Glancing,Move across central front speaker of ring formation
1,2,3,4,6,-8,-9,-10,-11,-31
2,Edgewise,Move across two front speakers of alternative ring formation
1,2,3,4,6,-8,-9,-10,-11,-31                
3,Crossing,Move from Front L to Front R of ring formation
1,2,3,4,6,-8,-9,-10,-11,-31               
4,Close,Move from Side Front L  to Side Front R of alternative ring formation
1,2,3,4,6,-8,-9,-10,-11,-31
5,Central,Move between central pair (L to R) of ring formation
1,2,3,5,6,-8,-9,-10,-11,-31
focus,integer
FOCUS: Centre chan. of motion. (Range: 1-8. Integer for odd modes; 1.5, 2.5 etc for even modes)
1,0,1,1,8,1,0,0,1,4,8,1
dur,secs
DUR: Duration of motion from edge to centre. (Min: 2 x Infile-length = 2 playings)
1,0,1,1,6000,100,1,2,0.01,30,60,1
steps,number
STEPS: Count of events from edge to centre (ONLY); Range: 2-32767.
1,0,1,2,100,2,0,0,2,50,100,2
maxangle,degrees
MAXANGLE: Maximum angle from centre line reached (degrees: 22.5 to 90).
1,0,1,225,900,450,1,2,22.5,45,90,45
maxdist,value
MAXDIST: Maximum distance from centre reached (1-1000 where halfradius = 1).
1,0,2,-1000,1000,-1000,1,2,1,100,1000,1
dec,attenuation
DEC: Gain reduction on passing from one event to the next (>0 to <1).
1,0,1,1,999,100,1,2,0.001,0.5,0.999,0.1
DUMMY,0-1
DUMMY: Progressive mix-in of infile2 (range 0-1).
1,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-tthreshold,level
THRESHOLD: Overall gain at which attenuation starts to increase.
0,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-dmaxlim,level
MAXLIM: Maximum limit (level) of attentuation after threshold reached (> ATTEN).
0,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-eminlim,level
MINLIM: Minimum overall level at which event ends (< THRESH).
0,0,1,0,1000,100,1,2,0,0.5,1.0,0.1
-mmaxdur,secs
MAXDUR: Maximum duration from edge to centre in case MINLIM never reached (Min:2 x Infile; >= DUR).
0,0,1,1,6000,500,1,2,0.01,30,60,5
-l,Left motion
OPTION: Motion from Right to Left; default is Left to Right

[2221],5,11,1,transit,filtered,Move 2 repeated sounds across 8-channel space (MONO in, M-C OUT)
1,Glancing,Move across central front speaker of ring formation
1,2,3,4,6,7,-8,-9,-10,-11,-31
2,Edgewise,Move across two front speakers of alternative ring formation
1,2,3,4,6,7,-8,-9,-10,-11,-31                
3,Crossing,Move from Front L to Front R of ring formation
1,2,3,4,6,7,-8,-9,-10,-11,-31               
4,Close,Move from Side Front L  to Side Front R of alternative ring formation
1,2,3,4,6,7,-8,-9,-10,-11,-31 
5,Central,Move between central pair (L to R) of ring formation
1,2,3,5,6,7,-8,-9,-10,-11,-31
focus,integer
FOCUS: Centre of motion.  (Range: 1-8. Integer for odd modes; 1.5, 2.5 etc for even modes)
1,0,1,1,8,1,0,0,1,4,8,1
dur,secs
DUR: Duration of motion from edge to centre. (Min: 2 x Infile-length)
1,0,1,1,6000,100,1,2,0.01,30,60,1
steps,number
STEPS: Count of events from edge to centre (ONLY); Range: 2-32767.
1,0,1,2,100,2,0,0,2,50,100,2
maxangle,degrees
MAXANGLE: Maximum angle from centre line reached (degrees: 22.5 to 90).
1,0,1,225,900,450,1,2,22.5,45,90,45
maxdist,value
MAXDIST: Maximum distance from centre reached (1-1000 where halfradius = 1).
1,0,2,-1000,1000,-1000,1,2,1,100,1000,1
dec,attenuation
DEC: Gain reduction on passing from one event to the next (>0 to <1).
1,0,1,1,999,100,1,2,0.001,0.5,0.999,0.1
mixin,0-1
MIXIN: Progressive mix-in of infile2 (range 0-1).
1,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-tthreshold,level
THRESHOLD: Overall gain at which attenuation starts to increase.
0,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-dmaxlim,level
MAXLIM: Maximum limit (level) of attentuation after threshold reached (0-1; > ATTEN).
0,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-eminlim,level
MINLIM: Minimum overall level at which event ends (0-1; < THRESH).
0,0,1,0,1000,100,1,2,0,0.5,1.0,0.1
-mmaxdur,secs
MAXDUR: Maximum duration from edge to centre in case MINLIM never reached (Min:2 x Infile; >= DUR).
0,0,1,1,6000,500,1,2,0.01,30,60,5
-l,Left motion
OPTION: Motion from Right to Left; default is Left to Right

[2222],5,11,1,transit,doppler,Move 2 or more repeated sounds across 8-channel space (MONO in, M-C OUT)
1,Glancing,Move across central front speaker of ring formation
1,2,3,4,6,-8,-9,-10,-11,-31
2,Edgewise,Move across two front speakers of alternative ring formation
1,2,3,4,6,-8,-9,-10,-11,-31                
3,Crossing,Move from Front L to Front R of ring formation
1,2,3,4,6,-8,-9,-10,-11,-31               
4,Close,Move from Side Front L  to Side Front R of alternative ring formation
1,2,3,4,6,-8,-9,-10,-11,-31 
5,Central,Move between central pair (L to R) of ring formation
1,2,3,5,6,-8,-9,-10,-11,-31
focus,integer
FOCUS: Centre of motion.  (Range: 1-8. Integer for odd modes; 1.5, 2.5 etc for even modes)
1,0,1,1,8,1,0,0,1,4,8,1
dur,secs
DUR: Duration of motion from edge to centre. (Min: 2 x Infile-length)
1,0,1,1,6000,100,1,2,0.01,30,60,1
steps,number
STEPS: Count of events from edge to centre (ONLY); Range: 2-32767.
1,0,1,2,100,2,0,0,2,50,100,2
maxangle,degrees
MAXANGLE: Maximum angle from centre line reached (degrees: 22.5 to 90).
1,0,1,225,900,450,1,2,22.5,45,90,45
maxdist,value
MAXDIST: Maximum distance from centre reached (1-1000 where halfradius = 1).
1,0,2,-1000,1000,-1000,1,2,1,100,1000,1
dec,attenuation
DEC: Gain reduction on passing from one event to the next (>0 to <1).
1,0,1,1,999,100,1,2,0.001,0.5,0.999,0.1
dummy,0-1
DUMMY: Progressive mix-in of infile2 (range 0-1).
1,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-tthreshold,level
THRESHOLD: Overall gain at which attenuation starts to increase.
0,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-dmaxlim,level
MAXLIM: Maximum limit (level) of attentuation after threshold reached (0-1; > ATTEN).
0,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-eminlim,level
MINLIM: Minimum overall level at which event ends (0-1; < THRESH).
0,0,1,0,1000,100,1,2,0,0.5,1.0,0.1
-mmaxdur,secs
MAXDUR: Maximum duration from edge to centre in case MINLIM never reached (Min:2 x Infile; >= DUR).
0,0,1,1,6000,500,1,2,0.01,30,60,5
-l,Left motion
OPTION: Motion from Right to Left; default is Left to Right

[2223],5,11,1,transit,doplfilt, Move 4 or more repeated sounds across 8-channel space (MONO in, M-C OUT)
1,Glancing,Move across central front speaker of ring formation
1,2,3,4,6,7,-8,-9,-10,-11,-31
2,Edgewise,Move across two front speakers of alternative ring formation
1,2,3,4,6,7,-8,-9,-10,-11,-31                
3,Crossing,Move from Front L to Front R of ring formation
1,2,3,4,6,7,-8,-9,-10,-11,-31               
4,Close,Move from Side Front L  to Side Front R of alternative ring formation
1,2,3,4,6,7,-8,-9,-10,-11,-31 
5,Central,Move between central pair (L to R) of ring formation
1,2,3,5,6,7,-8,-9,-10,-11,-31
focus,integer
FOCUS: Centre of motion.  (Range: 1-8. Integer for odd modes; 1.5, 2.5 etc for even modes)
1,0,1,1,8,1,0,0,1,4,8,1
dur,secs
DUR: Duration of motion from edge to centre. (Min: 2 x Infile-length)
1,0,1,1,6000,100,1,2,0.01,30,60,1
steps,number
STEPS: Count of events from edge to centre (ONLY); Range: 2-32767.
1,0,1,2,100,2,0,0,2,50,100,2
maxangle,degrees
MAXANGLE: Maximum angle from centre line reached (degrees: 22.5 to 90).
1,0,1,225,900,450,1,2,22.5,45,90,45
maxdist,value
MAXDIST: Maximum distance from centre reached (1-1000 where halfradius = 1).
1,0,2,-1000,1000,-1000,1,2,1,100,1000,1
dec,attenuation
DEC: Gain reduction on passing from one event to the next (>0 to <1).
1,0,1,1,999,100,1,2,0.001,0.5,0.999,0.1
mixin,0-1
MIXIN: Progressive mix-in of infile2 (range 0-1).
1,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-tthreshold,level
THRESHOLD: Overall gain at which attenuation starts to increase.
0,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-dmaxlim,level
MAXLIM: Maximum limit (level) of attentuation after threshold reached (0-1; > ATTEN).
0,0,1,0,1000,500,1,2,0,0.5,1.0,0.5
-eminlim,level
MINLIM: Minimum overall level at which event ends (0-1; < THRESH).
0,0,1,0,1000,100,1,2,0,0.5,1.0,0.1
-mmaxdur,secs
MAXDUR: Maximum duration from edge to centre in case MINLIM never reached (Min:2 x Infile; >= DUR).
0,0,1,1,6000,500,1,2,0.01,30,60,5
-l,Left motion
OPTION: Motion from Right to Left; default is Left to Right

[2224],5,6,1,transit,sequence,Move sequence of repeated sounds across 8-channel space (MONO in, M-C OUT)
1,Glancing,Move across central front speaker of ring formation
1,2,4,6,-31
2,Edgewise,Move across two front speakers of alternative ring formation
1,2,4,6,-31                
3,Crossing,Move from Front L to Front R of ring formation
1,2,4,6,-31               
4,Close,Move from Side Front L  to Side Front R of alternative ring formation
1,2,4,6,-31 
5,Central,Move between central pair (L to R) of ring formation
1,2,5,6,-31
focus,integer
FOCUS: Centre of motion. (Range: 1-8. Integer for odd modes; 1.5, 2.5 etc for even modes)
1,0,1,1,8,1,0,0,1,4,8,1
dur,secs
DUR: Duration of motion from edge to centre. (Min: 2 x Infile-length)
1,0,1,1,6000,100,1,2,0.01,30,60,1
dummy,number
DUMMY: Count of events in other TRANSITs
1,0,1,2,100,2,0,0,2,50,100,2
maxangle,degrees
MAXANGLE: Maximum angle from centre line reached (degrees: 22.5 to 90).
1,0,1,225,900,450,1,2,22.5,45,90,45
maxdist,value
MAXDIST: Maximum distance from centre reached (1-1000 where halfradius = 1).
1,0,2,-1000,1000,-1000,1,2,1,100,1000,1
dec,attenuation
DEC: Gain reduction on passing from one event to the next (>0 to <1).
1,0,1,1,999,100,1,2,0.001,0.5,0.999,0.1
-l,Left motion
OPTION: Motion from Right to Left; default is Left to Right

[2393],1,18,6,newsynth,synthesis,Multichannel synthesis
3,Multichannel,Multichannel synthesis where partials (spread over N octaves) fade in-out randomly
1,2,3,4,5,6,7,-8,-9,-10,-11,-12,-13,-14,-15,-16,-17,-18,-31,-32,-33,-34,-35,-36
spectrum,DATAFILE
SPECTRUM: File of Time, Partial no., Level [,Partial no., Level,...]; Partial may be inharmonic e.g. 2.5 
1,4,0,0,0,0,0,0,0,0,0,0
sample rate,hertz
SAMPLE RATE: (Hz) Val: 48000, 24000, 44100, 22050, 32000, or 16000 (?)
1,0,1,16000,48000,44100,0,0,16000,24000,48000,44100
outlength,secs
OUTLENGTH: Duration of output soundfile (0.04 to 7200 seconds)
1,0,1,10,30000,1000,1,2,0.1,150,300,10
frequency,hertz
FREQUENCY of output soundfile (0.1-22000 Hz)
1,1,2,-10000,10000,0,1,2,0.1,1000,20000,1000
outchans, number
OUTCHANS: number of output chans (2-16)
1,0,1,2,16,4,0,0,2,8,16,4
maxrange,8ves
MAXRANGE: Maximum range of transposition of spectral components (in whole octaves).
1,0,1,1,8,1,0,0,1,4,8,1
rate,secs
RATE: Average time between changes to partial-content of output (0.004 to 100 secs; <*OUTLENGTH).
1,0,2,-1000,1000,0,1,2,0.01,5.0,10.0,1.0
-uup,secs
UP: Rise time to expand to maximum range (0-100 secs).
0,0,2,-1000,1000,0,1,2,0.01,5.0,10.0,1.0
-ddown,secs
DOWN: Fall time to return to initial range before end (0-100 secs).
0,0,2,-1000,1000,0,1,2,0.01,5.0,10.0,1.0
-fsteady,secs
STEADY: Duration of steady state at sound end (0-3600 secs).
0,0,2,-1000,1000,0,1,2,0.01,5.0,10.0,1.0
-ssplice, msecs
SPLICE: Length of splice slope for partial entry and exit (2-50 ms). 
0,0,1,2,50,15,0,0,2,25,50,15
-npartials,number
PARTIALS: Same fixed number of partials chosen for each event (0-1000).
0,0,1,1,100,1,0,0,1,50,100,1
-tspacetype,number
SPACETYPE: Type of output spatialisation (0=random; others only if OUTCHANS=8)
0,0,1,0,14,0,0,0,0,7,14,0
-rrotation,hertz
ROTATION: Rotation speed (+/- 20 Hz.)
0,0,1,-2000,2000,0,1,2,-20,10,20,0
-efrom chan,channel
FROM CHAN: Sound emerges from this channel-number at start, over "from time" (0 to no. of chans.; max 16)
0,0,1,0,16,1,0,0,0,8,16,1
-Efrom time,secs
FROM TIME: Sound emerges over this time, from the given channel "from chan" (secs)
0,0,3,0,1000,0,1,2,0,0,0,0
-cto chan,channel
TO CHAN: Sound converges to this channel-number at end, over "to time" (0 to no. of chans.; max 16)
0,0,1,0,16,1,0,0,0,8,16,1
-Cto time,secs
TO TIME: Sound converges over this time, to the given channel "to chan" (secs)
0,0,3,0,1000,0,1,2,0,0,0,0
-a,Initial rise
OPTION: Initial rise in number of partials from only-the-fundamental.
-z,Decrease partials
OPTION: Fall in number of partials , during "steady state" to fundamental.
-x,Exclusive        
OPTION (Exclusive): change all partials (as far as poss) from event to event.
-m,Move
OPTION (Move): Distribute partials in space.
-j,Jump
OPTION (Jump): All partials assigned to same location for any one event.
-f,floats 
OPTION: Write soundfile as 32-bit floats (Default: 16-bit shorts)

[2754],2,12,4,shrink,shrink,Repeat a sound shrinking it on each repetition.
5,Found peaks,Shrink around found peaks and output each segment + mixfile
2,3,4,5,6,-7,-8,-9,-10,-11,-12,-31,-32,-33,-34
6,Specified peaks,Shrink around specified peaks and output each segment + mixfile
1,2,3,4,5,6,-7,-8,-9,-10,-11,-12,-31,-32,-33,-34
peaktimes,DATAFILE
PEAKTIMES: times of event peaks (single-column textfile: secs) in input to be retimed at regular intervals in output
1,9,4,0,1000,0,1,1,0,0,0,0
shrinkage,factor
SHRINKAGE: Shortening factor from one repeat to next until too short for splices (0-1; <CONTRACT)
1,0,1,0,1000,1000,1,2,0,0.5,1.0,1.0
window,msecs 
WINDOW: Window size for extracting envelope (1-100 msecs; default 100)
1,0,1,1,100,100,0,0,1,50,100,100
contract,factor
CONTRACT gaps between output events: 1.0 = equally spaced, < 1.0  become closer (>= SHRINKAGE)
1,0,1,1,1000,1000,1,2,0.001,0.5,1.0,1.0
after,secs
AFTER: Time after which shrinkage begins (0-filelength secs)
1,0,3,0,1000,0,1,2,0,0,0,0
splice,msecs
SPLICE: Splice length in msecs (2-50 ms)
1,0,1,2,50,15,0,0,2,25,50,15
-ssmall,secs
SMALL: Minimum sound length, after which sounds are of equal length (< MIN).
0,0,3,0,1000,0,1,2,0,0,0,0
-mmin,secs
MIN: Minimum event separation, after which events are regular in time (subject to RAND).
0,0,3,0,1000,0,1,2,0,0,0,0
-rrand,0-1
RAND: Randomisation of timings AFTER minimum event separation (MIN) reached.
0,0,1,0,100,0,1,2,0,0.5,1,0
-llen,secs
LEN: Minimum segment length before sound squeezing can begin (for "Even Squeeze" option).
0,0,3,0,1000,0,1,2,0,0,0,0
-ggate,0-1
GATE: Level (relative to max) below which found peaks ignored (0-1; default 0).
0,0,1,0,1000,0,1,2,0,0.5,1,0
-qskew,0-1
SKEW: How envelope centred on segment (0 to 1; default 0.25; 0.5 = central).
0,0,1,0,1000,500,1,2,0,0.5,1,0.5
-n,Equalise segments        
OPTION: Equalise maximum level of output events (if possible).
-i,Reverse segments
OPTION: Reverse each segment in output; reverse outfile to create expanding segments.
-e,Even Squeeze 
OPTION: Sounds shorten in regular manner, from 1st squeezed segment.
-o,Omit quiet events       
OPTION: Omit any too-quiet events once a fixed end tempo has been reached.

//----------------------------- REL 8 ----------------------------
[1115],4,13,2,splinter,splinter,Repeat and shrink waveset group as pulses
1,Lead in and change pitch,Splinters repeat & change pitch before merging at given time
1,2,3,4,5,6,-7,-8,-9,-10,-12,-13,-31,-32  
2,Emerge and change pitch,Splinter after given time and change pitch
1,2,3,4,5,6,-7,-8,-9,-10,-12,-13,-31,-32
3,Lead in only,Splinters repeat before merging with original at given time
1,2,3,4,5,6,-7,-8,-9,-11,-12,-13,-31,-32
4,Emerge only,Splinter after given time without changing pitch
1,2,3,4,5,6,-7,-8,-9,-11,-12,-13,-31,-32
target,secs
TARGET: Time in source file immediately before selected waveset group (0-file-length secs.)
1,0,3,0,1000,0,1,2,0,0,0,0
cycles,integer  
CYCLES: Number of wavesets used to create splinter group (0-256; < 1 minute)
1,0,1,1,256,100,0,0,1,128,256,100
shrink,integer
SHRINK: Number of waveset-group repeats that are shrunk (2-256)
1,0,1,2,256,50,0,0,1,128,256,50
beyond,integer
BEYOND: number of maximally-shrunken splinters beyond the shrink (0-256)
1,0,1,0,256,0,0,0,0,128,256,0
pulse1,Hz
PULSE 1: speed of repetitions at originating waveset (0-50 Hz; 0: determined by group duration)
1,0,1,0,500,0,1,2,0,25,50,0
pulse2,Hz
PULSE2: speed of shrunken wavesets (0-50 Hz; 0: same as PULSE 1)
1,0,1,0,500,0,1,2,0,25,50,0
-eextra,integer
EXTRA: number of additional regular pulses beyond SHRINK+BEYOND counts (0-10000)
0,0,1,1,1000,1,0,0,1,500,1000,1
-sshrincurve,value
SHRINK CURVE: shrinkage curve (0.1-10; 1=linear; >1 contracts quicker nr. orig. waveset; <1 slower)
0,0,2,-100,100,1,1,1,0.1,1,10,1
-ppulsecurve,value
PULSE CURVE: Pulse speed curve (0.1-10; 1=linear; >1 accel quicker nr. orig. waveset; <1 slower)
0,0,2,-100,100,1,1,1,0.1,1,10,1
-ffreq,Hz
FREQ: approx. frequency of maximally-shrunk splinters (1kHz-Nyquist/2; default: c.6kHz)
0,0,1,1000,10000,6000,1,1,1000,5000,10000,6000
-dduration,mS
DURATION: approx. duration of maximally-shrunk splinters (5-50 mS)
0,0,1,50,500,150,1,2,5,25,50,15
-rpulserand,0-1
PULSE-RAND: Randomisation of pulse timing (0-1; T-V)
0,1,1,0,100,0,1,2,0,0.5,1,0
-vshrinkrand,0-1
SHRINK-RAND: Randomisation of pulse shrinkage (0-1; T-V)
0,1,1,0,100,0,1,2,0,0.5,1,0
-i,Mix all source 
OPTION: mix all source into output (default: use source only where no splinters)
-I,Mix no source
OPTION: mix none of source into output 


[2760],4,20,0,pulser,pulser,Stream iterated sound-packets extracted from source sound
1,Pitched,Brightness of sound-packets taken from source and pitch from pitch parameter
1,2,5,6,7,8,9,10,11,12,-13,-14,-15,-16,-17,-18,-19
2,From source start,Sound-packets taken from start of source
1,5,6,7,8,9,10,11,12,-13,-14,-15,-16,-17,-18,-19
3,Randomly selected,Sound-packets randomly selected from within source -- output stereo (0) or listed channels
3,1,5,6,7,8,9,10,11,12,-13,-14,-15,-16,-17,-18,-19,-20
3,Randomly selected (time-varying),Sound-packets randomly selected from within source -- output Time-Vary multi-chan
4,1,5,6,7,8,9,10,11,12,-13,-14,-15,-16,-17,-18,-19,-20
outlength,secs
OUTLENGTH: Duration of output soundfile (0.02-32767 secs )
1,0,1,10,30000,1000,1,2,0.1,150,300,10
pitch,MIDI
PITCH: MIDI pitch of packets (Range 24 to 96; T-V)
1,1,1,2400,9600,2400,1,2,24,48,96,24
chans,list
CHANS: for stereo enter 0; OR for 8-chan: list chans to use in order, no repeats (1-8 max.)
1,2,0,0,0,0,0,0,0,0,0,0
spacedata,datafile
SPACEDATA: multi-chan. only -- set of lines, each of time then list of channels to use in num. order (1-8 max.)
1,4,0,0,0,0,0,0,0,0,0,0
minrise,secs
MINRISE: min. rise-time of packet envelope; range 0.002 secs (2mS) to 0.2 secs (200mS)
1,0,1,2,200,50,1,3,0.002,0.1,0.2,0.05
maxrise,secs
MAXRISE: max. rise-time of packet envelope; risetime is random between minrise and maxrise.
1,0,1,2,200,50,1,3,0.002,0.1,0.2,0.05 
minsus,secs
MINSUS: min. sustain-time of packet envelope; range 0 to 0.2 secs (200mS)
1,0,1,0,200,50,1,3,0,0.1,0.2,0.05
maxsus,secs
MAXSUS: max. sustain-time of packet envelope; sustain random between minsus and maxsus.
1,0,1,0,200,50,1,3,0,0.1,0.2,0.05
mindecay,secs
MINDECAY: min. decay-time of packet envelope; range 0.02 secs (20mS) to 2.0 secs (2000 mS)
1,0,1,20,2000,50,1,2,0.02,1,2,0.05
maxdecay,secs
MAXDECAY: min. decay-time of packet envelope; decay random between mindecay and maxdecay. 
1,0,1,20,2000,50,1,2,0.02,1,2,0.05
speed,secs
SPEED: average time between packets in output. (0.05 to 1 sec; T-V)
1,1,1,50,1000,500,1,3,0.05,0.5,1.0,0.5
scatter,0-1
SCATTER: randomisation of speed (0-1; T-V)
1,1,1,0,100,0,1,2,0,0.5,1,0
-eexpr,slope
EXPR: rise slope of packets (.25 to 4: 1=linear; <1 steeper; >1 shallower; T-V)
0,1,2,-250,400,0,1,2,0.25,2,4,1.0
-Eexpd,slope
EXPD: decay slope of packets (.25 to 4; 1=linear; >1 steeper; <1 shallower; T-V)
0,1,2,-250,400,0,1,2,0.25,2,4,1.0
-ppchscat,0-1
PCHSCAT: random pitch jitter of packets (0-1 semitones; T-V)
0,1,1,0,100,0,1,2,0,0.5,1,0
-aampscat,0-1
AMPSCAT: random amplitude jitter of packets (01; T-V)
0,1,1,0,100,0,1,2,0,0.5,1,0
-ooctave,0-1
OCTAVE: amount of lower-octave reinforcement (0-1; T-V)
0,1,1,0,100,0,1,2,0,0.5,1,0
-bpchbend,semitones
PCHBEND: amount of upward pitch-bend of packets (0-1 semitones; T-V)
0,1,1,0,100,0,1,2,0,0.5,1,0
-sseed,integer
SEED: same seed-number produces identical output on re-run (Integer >=1)
0,0,1,1,10000,1,0,0,1,5000,10000,1
-wwidth,0-1
WIDTH: spatialisation width (0-1; 0=mono otherwise degree of spatial scatter across stereo/multi-chan. space)
0,1,1,0,100,0,1,2,0,0.5,1,0

[2761],4,20,1,pulser,multi,Stream iterated sound-packets extracted from source sound (XP)
1,Pitched,Brightness of sound-packets taken from source and pitch from pitch parameter
1,2,5,6,7,8,9,10,11,12,-13,-14,-15,-16,-17,-18,-19,-31
2,From source start,Sound-packets taken from start of source
1,5,6,7,8,9,10,11,12,-13,-14,-15,-16,-17,-18,-19,-31
3,Randomly selected,Sound-packets randomly selected from within source -- output stereo (0) or listed channels
3,1,5,6,7,8,9,10,11,12,-13,-14,-15,-16,-17,-18,-19,-20,-31
3,Randomly selected (time-varying),Sound-packets randomly selected from within source -- output Time-Vary multi-chan
4,1,5,6,7,8,9,10,11,12,-13,-14,-15,-16,-17,-18,-19,-20,-31
outlength,secs
OUTLENGTH: Duration of output soundfile (0.02-32767 secs )
1,0,1,10,30000,1000,1,2,0.1,150,300,10
pitch,MIDI
PITCH: MIDI pitch of packets (Range 24 to 96; T-V)
1,1,1,2400,9600,2400,1,2,24,48,96,24
chans,list
CHANS: for stereo enter 0; OR for 8-chan: list chans to use in order, no repeats (1-8 max.)
1,2,0,0,0,0,0,0,0,0,0,0
spacedata,datafile
SPACEDATA: multi-chan. only -- set of lines, each of time then list of channels to use in num. order (1-8 max.)
1,4,0,0,0,0,0,0,0,0,0,0
minrise,secs
MINRISE: min. rise-time of packet envelope; range 0.002 secs (2mS) to 0.2 secs (200mS)
1,0,1,2,200,50,1,3,0.002,0.1,0.2,0.05
maxrise,secs
MAXRISE: max. rise-time of packet envelope; risetime is random between minrise and maxrise.
1,0,1,2,200,50,1,3,0.002,0.1,0.2,0.05 
minsus,secs
MINSUS: min. sustain-time of packet envelope; range 0 to 0.2 secs (200mS)
1,0,1,0,200,50,1,3,0,0.1,0.2,0.05
maxsus,secs
MAXSUS: max. sustain-time of packet envelope; sustain random between minsus and maxsus.
1,0,1,0,200,50,1,3,0,0.1,0.2,0.05
mindecay,secs
MINDECAY: min. decay-time of packet envelope; range 0.02 secs (20mS) to 2.0 secs (2000 mS)
1,0,1,20,2000,50,1,2,0.02,1,2,0.05
maxdecay,secs
MAXDECAY: min. decay-time of packet envelope; decay random between mindecay and maxdecay. 
1,0,1,20,2000,50,1,2,0.02,1,2,0.05
speed,secs
SPEED: average time between packets in output. (0.05 to 1 sec; T-V)
1,1,1,50,1000,500,1,3,0.05,0.5,1.0,0.5
scatter,0-1
SCATTER: randomisation of speed (0-1; T-V)
1,1,1,0,100,0,1,2,0,0.5,1,0
-eexpr,slope
EXPR: rise slope of packets (.25 to 4: 1=linear; <1 steeper; >1 shallower; T-V)
0,1,2,-250,400,0,1,2,0.25,2,4,1.0
-Eexpd,slope
EXPD: decay slope of packets (.25 to 4; 1=linear; >1 steeper; <1 shallower; T-V)
0,1,2,-250,400,0,1,2,0.25,2,4,1.0
-ppchscat,0-1
PCHSCAT: random pitch jitter of packets (0-1 semitones; T-V)
0,1,1,0,100,0,1,2,0,0.5,1,0
-aampscat,0-1
AMPSCAT: random amplitude jitter of packets (01; T-V)
0,1,1,0,100,0,1,2,0,0.5,1,0
-ooctave,0-1
OCTAVE: amount of lower-octave reinforcement (0-1; T-V)
0,1,1,0,100,0,1,2,0,0.5,1,0
-bpchbend,semitones
PCHBEND: amount of upward pitch-bend of packets (0-1 semitones; T-V)
0,1,1,0,100,0,1,2,0,0.5,1,0
-sseed,integer
SEED: same seed-number produces identical output on re-run (Integer >=1)
0,0,1,1,10000,1,0,0,1,5000,10000,1
-wwidth,0-1
WIDTH: spatialisation width (0-1; 0=mono otherwise degree of spatial scatter across stereo/multi-chan. space)
0,1,1,0,100,0,1,2,0,0.5,1,0
-r,Fully random
OPTION: Next file chosen at random. Default: all files used, though in random order.   


[2762],3,20,0,pulser,synth,Iterate synthesised sound-packets 
1,Static spectrum,Sound-packets all have the same spectrum
1,2,3,4,5,6,7,8,9,10,11,-12,-13,-14,-15,-16,-17,-18,-19,-20
2,Time-varied spectrum,Spectrum changes through time from one packet to next 
1,2,3,4,5,6,7,8,9,10,11,-12,-13,-14,-15,-16,-17,-18,-19,-20
3,Random spectrum,Spectrum changes randomly from one packet to next 
1,2,3,4,5,6,7,8,9,10,11,-12,-13,-14,-15,-16,-17,-18,-19,-20
partials,DATAFILE
PARTIALS: File of Time (not Mode 1),Partial(1-64),Level(-1to1)[,Partial, Level,...]
1,4,0,0,0,0,0,0,0,0,0,0
outlength,secs
OUTLENGTH: Duration of output soundfile (?- 32767 ? secs )
1,0,1,10,30000,1000,1,2,0.1,150,300,10
pitch,MIDI
PITCH: MIDI pitch of packets (Range 24 to 96; T-V)
1,1,1,2400,9600,2400,1,2,24,48,96,24
minrise,secs
MINRISE: min. rise-time of packet envelope; range 0.002 secs (2mS) to 0.2 secs (200mS)
1,0,1,2,200,50,1,3,0.002,0.1,0.2,0.05
maxrise,secs
MAXRISE: max. rise-time of packet envelope; risetime is random between minrise and maxrise.
1,0,1,2,200,50,1,3,0.002,0.1,0.2,0.05 
minsus,secs
MINSUS: min. sustain-time of packet envelope; range 0 to 0.2 secs (200mS)
1,0,1,0,200,50,1,3,0,0.1,0.2,0.05
maxsus,secs
MAXSUS: max. sustain-time of packet envelope; sustain random between minsus and maxsus.
1,0,1,0,200,50,1,3,0,0.1,0.2,0.05
mindecay,secs
MINDECAY: min. decay-time of packet envelope; range 0.02 secs (20mS) to 2.0 secs (2000 mS)
1,0,1,20,2000,50,1,2,0.02,1,2,0.05
maxdecay,secs
MAXDECAY: min. decay-time of packet envelope; decay random between mindecay and maxdecay. 
1,0,1,20,2000,50,1,2,0.02,1,2,0.05
speed,secs
SPEED: average time between packets in output. (0.05 to 1 sec; T-V)
1,1,1,50,1000,50,1,3,0.05,0.5,1.0,0.05
scatter,0-1
SCATTER: randomisation of speed (0-1; T-V)
1,1,1,0,100,0,1,2,0,0.5,1,0
-eexpr,slope
EXPR: rise slope of packets (.25 to 4; 1=linear; >1 steeper; <1 shallower; T-V)
0,1,2,-250,400,0,1,2,0.25,2,4,1.0
-Eexpd,slope
EXPD: decay slope of packets (.25 to 4; 1=linear; >1 steeper; <1 shallower; T-V)
0,1,2,-250,400,0,1,2,0.25,2,4,1.0
-ppchscat,0-1
PCHSCAT: random pitch jitter of packets (0-1 semitones; T-V)
0,1,1,0,100,0,1,2,0,0.5,1,0
-aampscat,0-1
AMPSCAT: random amplitude jitter of packets (01; T-V)
0,1,1,0,100,0,1,2,0,0.5,1,0
-ooctave,0-1
OCTAVE: amount of lower-octave reinforcement (0-1; T-V)
0,1,1,0,100,0,1,2,0,0.5,1,0
-bpchbend,semitones
PCHBEND: amount of upward pitch-bend of packets (0-1 semitones; T-V)
0,1,1,0,100,0,1,2,0,0.5,1,0
-sseed,integer
SEED: same seed-number produces identical output on re-run (Integer >=1)
0,0,1,1,10000,1,0,0,1,5000,10000,1
-Ssample-rate,hertz
SAMPLE-RATE: (Hz) Val: 48000, 44100, 96000
0,0,1,44100,96000,44100,0,0,44100,48000,96000,44100
-ccount,partials
PARTIAL COUNT: No. of partials in sound (0[use all]-64; 2.5=2 + no. 3 at half level; T-V) 
0,1,1,0,640,0,1,2,0,32,64,0

[2772],9,16,2,motor,motor,Create pulse-stream within slower pulsed-enveloping (SINGLE or MULTI-SOURCE)
1,Widen freqs.,Widen frequency range (SINGLE-SOURCE)
2,3,4,5,6,7,-8,-9,-10,-11,-12,-13,-14,-15,-16,-31,-32
3,Widen freqs.(multi-srce),Widen frequency range (MULTI-SOURCE)
2,3,4,5,6,7,-8,-9,-10,-11,-12,-13,-14,-15,-16,-31,-32
4,Reads advance,Source-reads advance (SINGLE-SRCE)
2,3,4,5,6,7,-8,-9,-10,-11,-12,-13,-14,-15,-16,-31,-32
6,Reads advance(multi-srce),Source-reads advance (MULTI-SRCE)
2,3,4,5,6,7,-8,-9,-10,-11,-12,-13,-14,-15,-16,-31,-32
7,Reads advance/regress,Source-reads advance or regress (SINGLE-SRCE)
2,3,4,5,6,7,-8,-9,-10,-11,-12,-13,-14,-15,-16,-31,-32
9,Reads advance/regress(multi-srce),Source-reads advance or regress (MULTI-SRCE)
2,3,4,5,6,7,-8,-9,-10,-11,-12,-13,-14,-15,-16,-31,-32
2,Use cut-times,Segments are cut at specified times (SINGLE SOURCE)
1,2,3,4,5,6,7,-8,-9,-10,-11,-12,-13,-14,-15,-16,-31,-32
5,Reads advance,Source-reads advance; segments cut at specified times (SINGLE-SRCE)
1,2,3,4,5,6,7,-8,-9,-10,-11,-12,-13,-14,-15,-16,-31,-32
8,Reads advance or regress,Source-reads advance or regress; segments cut at specified times (SINGLE-SRCE)
1,2,3,4,5,6,7,-8,-9,-10,-11,-12,-13,-14,-15,-16,-31,-32
cuts,DATAFILE
CUT-TIMES: textfile of infile times to cut into separate sources
1,9,4,0,1000,0,1,1,0,0,0,0
outlength,secs
OUTLENGTH: Duration of output soundfile (secs). 
1,0,1,10,3000,100,1,2,1.0,150,300,10
freq,Hz
FREQ: pulse-rate of inner-pulses (2 to 100 Hz)
1,0,1,20,1000,20,1,2,2,50,100,2
pulse,Hz
PULSE: pulse-rate of outer-pulses (0.1 to 10 Hz)
1,0,2,-1000,1000,-500,1,2,0.1,1,10,0.5
fratio,0-1
FRATIO: proportion of on-time to off-time of inner-events (0-1)
1,0,1,0,10,5,1,2,0,0.5,1,0.5
pratio,0-1
PRATIO: proportion of on-time to off-time of outer-events (0-1)
1,0,1,0,10,5,1,2,0,0.5,1,0.5
symmetry,0-1
SYMMETRY: of outer-pulses' envelope (0 to 1; 0=decresc. 1=cresc.)
1,0,1,0,10,5,1,2,0,0.5,1,0.5
-ffreqrand,0-1
FREQRAND: randomise freq.(f) (0-1; Max. variation = f/2 to 3f/2)
0,0,1,0,10,0,1,2,0,0.5,1,0
-ppulserand,0-1
PULSERAND: randomise pulse (p) (0-1; Max. variation = p/2 to 3p/2)
0,0,1,0,10,0,1,2,0,0.5,1,0
-jjitter,semitones
JITTER: randomise pitch of inner-pulses (0-3 semitones)
0,0,1,0,300,0,1,2,0,1.5,3,0
 -ttremor,0-1
TREMOR: randomise attenuation of inner-pulses (0-1)
0,0,1,0,10,0,1,2,0,0.5,1,0
-yshift,0-1
SHIFT: randomise outer-pulse symmetry (0-1)
0,0,1,0,10,0,1,2,0,0.5,1,0
-eedge,multiple
EDGE: length of decay-tail of inner-pulses: multiple of OUTLENGTH (0-20)
0,0,1,0,200,0,1,2,0,10,20,0
-bbite,shape 
BITE: shape of outer-pulses (0.1 to 10, default = 3)
0,0,2,-1000,1000,300,1,2,0.1,1,10,3.0
-vvary,0-1
VARY: randomly vary advance-step in source-read. (0-1)
0,0,1,0,10,0,1,2,0,0.5,1,0
-sseed,value
SEED: different seed values give different randomised outputs (0-256)
0,0,1,0,256,0,0,0,0,128,256,0
-a,Fixed-step 
OPTION: only if VARY not set - inner-events advance by fixed step. (Default: advance to srce-end) 
-c,Cycle sources
OPTION: Modes 2 + 7 only - cycle through input sources. (Default: randomly permute order.)

[2773],3,11,1,rotor,rotor,Generate note-sets which grow & shrink in pitch-range and speed
1,Time-step,Time step separates note groups
3,4,5,6,7,8,9,10,1,2,-11,-31
2,Spacings,Spacings within current set determine start of next group
3,4,5,6,7,8,9,10,1,-11,-31
3,Overlay,Note-set's first overlaid on last event of previous set
3,4,5,6,7,8,9,10,1,-11,-31
outlength,secs
OUTLENGTH: Duration of output soundfile (1-32767 secs). 
1,0,1,1,3000,100,1,2,0.1,150,300,10
groupstep,secs
GROUPSTEP: Mode 1 - time-step between each note-group (1-60) 
1,0,1,10,600,10,1,2,1,30,60,1
envel,BRKFILE
ENVEL: envelope (Time-Amp) imposed over output events; determines duration of all events.
1,6,1,0,100,0,1,2,0,0.5,1,0
count,number
COUNT: no. of events in each note-set (3-127)
1,0,1,3,127,3,0,0,3,63,127,3
minpch,MIDI
MINPCH: minimum pitch of events (MIDI: 0-127)
1,0,1,0,1270,240,1,2,0,64,127,24
maxpch,MIDI
MAXPCH: maximum pitch of events (MIDI: 0-127)
1,0,1,0,1270,960,1,2,0,64,127,96
maxstep,secs
MAXSTEP: maximum time-step between event-onsets (0-4 secs)
1,0,1,0,400,100,1,2,1,2,4,1
pchrot,number
PITCH ROTATION: no. of notesets before pitch-sequence returns to original (4-256)
1,0,1,4,256,4,0,0,4,128,256,4
trot,number
TROT: no. of speeds before speed returns to original (4-256)
1,0,1,4,256,4,0,0,4,128,256,4
phase,0-1
PHASE: initial phase difference between pchrot and trot (0-1)
1,0,1,0,100,50,1,2,0,0.5,1,0.5
-ddovetail,mS 
DOVETAIL: start/end dovetails of input soundfile (0-5 mS)
0,0,1,0,5,0,0,0,0,2,5,0
-s,Stereo output
OPTION: output grows and shrinks in stereo spatial width

[2775],1,11,1,stutter,stutter,Randomly repeat cut segments
0,Stutter,Segments cut from elements are played in random order with possible intervening silence
1,2,3,4,5,6,7,-8,-9,-10,-11,-31
cuts,DATAFILE 
CUTS: list of times to slice source (0.016" [MIN step] to filelength-MIN)
1,9,4,0,1000,0,1,1,0,0,0,0
outlength,secs
OUTLENGTH: Duration of output soundfile (1-7200 secs). 
1,0,1,100,3000,100,1,2,1,150,300,1
segjoins,value
SEGJOINS: no. of joined-segments as sources (1-8)
1,0,1,1,8,1,0,0,1,4,8,1
silprop,0-1
SILPROP: proportion of joins to have inserted silence (0-1; if >0, min. is 0.05 =1/20)
1,0,1,0,100,5,1,2,0,0.5,1,0.05
minsil,secs
MINSIL: minimum silence at joins (0-10 mS? - not secs)
1,0,1,0,100,0,1,2,0,5,10,0
maxsil,secs
MAXSIL: maximum silence at joins  >=MINSIL (0-10 mS?)
1,0,1,0,100,0,1,2,0,5,10,0
seed,value
SEED: same seed value produces identical output for random values
1,0,1,0,256,1,0,0,0,128,256,1
-ttransp,semitones 
TRANSP: random transposition of segments (0-3 semitones)
0,0,1,0,30,0,1,2,0,1.5,3.0,0
-aatten,0-1
ATTEN: random attenuation of segment level (0-1)
0,0,1,0,100,0,1,2,0,0.5,1,0
-bbias,value
BIAS: bias size of segments cut (-1 to +1; <0 smaller; >0 larger; 0=none)
0,0,1,-100,100,0,1,2,-1,0,1,0
-mmindur,mS
MINDUR: minimum length of cut segments(>8mS to 250mS)
0,0,1,9,2500,9,0,0,9,125,250,9
-p,Permutate elements
OPTION: all elements used; permutate order before cutting and playing new segments

[2778],12,12,1,envspeak,envspeak,Process enveloped segments
1,Repeat segments,Repeat each segment REPEAT times
1,2,3,4,9
2,Reverse repeat,Each segment is played forwards then reversed
1,2,3
3,Attenuate group,Attenuate first ATTENCT segments in every ATTENCT+1 segments
1,2,3,5,6
4,Attenuate except,Attenuate all in every ATTENCT+1 segments except ATTENCT
1,2,3,5,6
5,Repeat shrinking from end,Repeat each segment N times shrinking from end
1,2,3,4,9
6,Repeat shrinking from start,Repeat each segment N times shrinking from start
1,2,3,4,9
7,Repeat divided segment,Divide segments into DIV parts and repeat one part DIV times
1,2,3,7,9,8,-31
8,Repeat shortening at end,Repeat each segment shortening each repetition from end
1,2,3,4,9,10
9,Repeat shortening at start,Repeat each segment shortening each repetition from start
1,2,3,4,9,10
10,Extract all segments (no preview),Extract all enveloped segments
1,2
11,Random reorder,Randomly reorder segments
1,2,12
12,Reverse group order,Reverse segment order within groups of segments 
1,2,11
windowsize,mS
WINDOW SIZE: size of envelope-search window (5-1000 mS; default 50 mS)
1,0,1,1,100,50,0,0,1,50,100,50
splice,mS
SPLICE: Length of splice slope (2-100 mS; default 15mS)
1,0,1,20,1000,150,1,2,2,50,100,15
offset,number
OFFSET: number of intial peaks to output unchanged (0-100)
1,0,1,0,100,0,0,0,0,50,100,0
repeats,number
REPEATS: number of repetitions of each segment (2 to 100)
1,1,1,2,100,2,0,0,2,50,100,2
attenct,number
ATTENCT: No. of segments to attenuate (Mode 3) or NOT (Mode 4) in group of ATTENCT+1 (1-100)
1,1,1,1,100,1,0,0,1,50,100,1
atten,dB
ATTEN: reduce attenuated segments by ATTEN dB (-96 to < 0 dB)
1,1,1,-96,0,-15,0,0,-96,-48,0,-15
div,number
DIV: no. of parts into which to divide segment - to repeat DIV times (1-100)
1,0,1,1,100,1,0,0,1,50,100,1
part,number
PART: which portion of divided segment to repeat (1 to DIV)
1,0,1,1,100,1,0,0,1,50,100,1
rand,0-1
RAND: randomise lengths of repeated units (0-1?)
1,0,1,0,100,0,1,2,0,0.5,1.0,0
ratio,value
RATIO: reduce length of repeated elements by ratio (0.1 to 1)
1,0,1,1,1000,1000,1,2,0.1,0.5,1,1
groupsize,number
GROUPSIZE: Reverse order in groups of GROUPSIZE segments (1-100; e.g. for 3 abc|def -> cba|fed)
1,0,1,1,100,1,0,0,1,50,100,1
seed,number
SEED: for random order permutation - same seed no. gives identical output (if >0)
1,0,1,0,100,0,0,0,0,50,100,0
-z,Same-size repeats
OPTION: repeated elements do not grow in size (machine-like quality)

//25,Remove silent gaps,TIMES datafile gives times to remove silent gaps
13
times,DATAFILE
TIMES: textfile of times in infile to remove silent gaps (?NOT including 0 or end-time)
1,9,4,0,1000,0,1,1,0,0,0,0


[2779],12,12,1,envspeak,envspeak,Process cut segments
13,Repeat segments,Repeat each segment REPEAT times
1,2,3,4,9
14,Reverse repeat,Repeat each segment reversed
1,2,3
15,Attenuate group,Attenuate ATTENCT segments in every ATTENCT+1 segments
1,2,3,5,6
16,Attenuate except,Attenuate all in every ATTENCT+1 segments except ATTENCT
1,2,3,5,6
17,Repeat shrinking from end,Repeat each segment N times shrinking from end
1,2,3,4,9
18,Repeat shrinking from start,Repeat each segment N times shrinking from start
1,2,3,4,9
19,Repeat divided segment,Divide segments into DIV parts and repeat one part DIV times
1,2,3,7,9,8,-31
20,Repeat shortening at end,Repeat each segment shortening each repetition from end
1,2,3,4,9,10
21,Repeat shortening at start,Repeat each segment shortening each repetition from start
1,2,3,4,9,10
22,Extract all (multi-outs),Extract all cut segments
1,2
23,Random reorder,Randomly reorder segments
1,2,12
24,Reverse group order,Reverse segment order within groups of segments
1,2,11
cuts,DATAFILE
CUTS: textfile of times in infile to slice it into segments (NOT including 0 or end-time)
1,9,4,0,1000,0,1,1,0,0,0,0
splice,mS
SPLICE: Length of splice slope (2-100 mS; default 15mS)
1,0,1,20,1000,150,1,2,2,50,100,15
offset,number
OFFSET: number of intial peaks to output unchanged (0-100)
1,0,1,0,100,0,0,0,0,50,100,0
repeats,number
REPEATS: number of repetitions of each segment (2 to 100)
1,1,1,2,100,2,0,0,2,50,100,2
attenct,number
ATTENCT: No. of segments to attenuate (Mode 3) or NOT (Mode 4) in group of ATTENCT+1 (1-100)
1,1,1,1,100,1,0,0,1,50,100,1
atten,dB
ATTEN: reduce attenuated segments by ATTEN dB (-96 to <0 dB)
1,1,1,-96,0,-15,0,0,-96,-48,0,-15
div,number
DIV: no. of parts into which to divide segment - to repeat DIV times (1-100)
1,0,1,1,100,1,0,0,1,50,100,1
part,number
PART: which portion of divided segment to repeat (1 to DIV)
1,0,1,1,100,1,0,0,1,50,100,1
rand,0-1
RAND: randomise lengths of repeated units (0-1?)
1,0,1,0,100,0,1,2,0,0.5,1.0,0
ratio,value
RATIO: reduce length of repeated elements by ratio (0.1 to 1)
1,0,1,1,1000,1000,1,2,0.1,0.5,1,1
groupsize,number
GROUPSIZE: Reverse order in groups of GROUPSIZE segments (1-100; e.g. for 3 abc|def -> cba|fed)
1,0,1,1,100,1,0,0,1,50,100,1
seed,number
SEED: for random order permutation - same seed no. gives identical output (if >0)
1,0,1,0,100,0,0,0,0,50,100,0
-z,Same-size repeats
OPTION: repeated elements do not grow in size (machine-like quality)

//limited 1-mode crumble
[283x],1,13,0,crumble,sound,Project segments spatially with poss timestretch (CDP8)
1,8-channel output,Project segments over progressively smaller groups of channels
1,2,3,4,5,6,7,8,9,10,11,-12,-13
start,secs
START: time in infile to start crumbling (0 to <filelength)
1,0,3,0,1000,0,1,2,0,0,0,0
dur1,secs
DURATION 1: length of section where signal split into 2 images (secs)
1,0,3,0,1000,0,1,2,0,0,0,1
dur2,secs
DURATION 2: length of section where signal split into 4 images (secs)
1,0,3,0,1000,0,1,2,0,0,0,1
orient,channel
ORIENT: channel around which input first split (1-8 or 1-16 Mode 2)
1,0,1,1,8,4,0,0,1,4,8,4
size,secs
SIZE: Average length of segments (secs; T-V)
1,1,3,10,1000,50,1,2,0.01,0,0,0.5
rand,0-1
RAND: Randomise segment size (0-1; T-V; 1: modifies SIZE randomly from SIZE/2 to (3*SIZE)/2
1,1,1,0,100,0,1,2,0,0.5,1,0.5
inscatter,0-1
INSCATTER: scatter start-time (in source) of next segment (0-1; T-V)
1,1,1,0,100,0,1,2,0,0.5,1,0
outscatter,0-1
OUTSCATTER: scatter time-placement (in output) in range used (0-1; T-V)
1,1,1,0,100,0,1,2,0,0.5,1,0
stretch,factor
STRETCH: stretch time-placement in output (1-64; T-V)
1,1,1,10,640,10,1,2,1,32,64,1
pchvary,semitones
PCH VARY: vary pitch of output segments (0-12 semitones; T-V)
1,1,1,0,120,0,1,2,0,6.0,12,0
seed,number
SEED: same seed value gives identical output on successive runs
1,0,1,1,256,1,0,0,1,128,256,1
-ssplice,mS
SPLICE: Length of splice slope used to cut segments (2-50 mS)
0,0,1,2,50,2,1,2,2,25,50,2
-ttail,mS
TAIL: Length of any exponential tail on segments (0-1000 mS; T-V)
0,1,1,0,1000,100,1,2,0,500,1000,100

//Full 2-mode crumble: Mode 2 crashing!
[2831],2,14,0,crumble,sound,Project segments spatially with poss timestretch (CDP8)
1,8-channel output,Project segments over progressively smaller groups of channels
1,2,3,5,6,7,8,9,10,11,12,-13,-14
2,16-channel output,Project segments over progressively smaller groups of channels
1,2,3,4,5,6,7,8,9,10,11,12,-13,-14
start,secs
START: time in infile to start crumbling (0 to <filelength)
1,0,3,0,1000,0,1,2,0,0,0,0
dur1,secs
DURATION 1: length of section where signal split into 2 images (secs)
1,0,3,0,1000,0,1,2,0,0,0,1
dur2,secs
DURATION 2: length of section where signal split into 4 images (secs)
1,0,3,0,1000,0,1,2,0,0,0,1
dur3,secs
DURATION 3: (mode 2) length of section where signal split into 8 images (secs)
1,0,3,0,1000,0,1,2,0,0,0,0
orient,channel
ORIENT: channel around which input first split (1-8 or 1-16 Mode 2)
1,0,1,1,8,1,0,0,1,4,8,1
size,secs
SIZE: Average length of segments (secs; T-V)
1,1,3,10,1000,50,1,2,0.01,0,0,0.5
rand,0-1
RAND: Randomise segment size (0-1; T-V; 1: modifies SIZE randomly from SIZE/2 to (3*SIZE)/2
1,1,1,0,100,0,1,2,0,0.5,1,0.5
inscatter,0-1
INSCATTER: scatter start-time (in source) of next segment (0-1; T-V)
1,1,1,0,100,0,1,2,0,0.5,1,0
outscatter,0-1
OUTSCATTER: scatter time-placement (in output) in range used (0-1; T-V)
1,1,1,0,100,0,1,2,0,0.5,1,0
stretch,factor
STRETCH: stretch time-placement in output (1-64; T-V)
1,1,1,10,640,10,1,2,1,32,64,1
pchvary,semitones
PCH VARY: vary pitch of output segments (0-12 semitones; T-V)
1,1,1,0,120,0,1,2,0,6.0,12,0
seed,number
SEED: same seed value gives identical output on successive runs
1,0,1,1,256,1,0,0,1,128,256,1
-ssplice,mS
SPLICE: Length of splice slope used to cut segments (2-50 mS)
0,0,1,2,50,2,1,2,2,25,50,2
-ttail,mS
TAIL: Length of any exponential tail on segments (0-1000 mS; T-V)
0,1,1,0,1000,100,1,2,0,500,1000,100

[468],1,11,4,specfnu,specfnu,Convert formant frequencies to sine tones
23,Formants to sine,Single sine wave represents each formant
1,2,-3,-4,-5,-6,-7,-8,-9,-10,-11,-31,-32,-33,-34
quant,Datafile
QUANT: Text file about pitches to quantise to (click F1 for details); 0= no quantisation
1,7,1,0,0,0,0,0,0,0,0,0
sining,0-1
SINING: Degree of sinusoidisation (0-1)
1,0,1,0,100,100,1,2,0,0.5,1,1
-again,level
GAIN: Output gain or attenuation. (0.01-10)
0,0,2,-1000,1000,0,1,2,0.01,1,10,1.0
-bamp1,level
AMP1: Relative gain or attenuation of formant 1 (0.01-10)
0,0,2,-1000,1000,0,1,2,0.01,1,10,1.0
-camp2,level
AMP2: Relative gain or attenuation of formant 2 (0.01-10)
0,0,2,-1000,1000,0,1,2,0.01,1,10,1.0
-damp3,level
AMP3: Relative gain or attenuation of formant 3 (0.01-10)
0,0,2,-1000,1000,0,1,2,0.01,1,10,1.0
-eamp4,level
AMP4: Relative gain or attenuation of formant 4 (0.01-10)
0,0,2,-1000,1000,0,1,2,0.01,1,10,1.0
-nqdepth1,0-1
DEPTH 1: How strongly to force formant 1 to quantised pitch (0-1); only if PCHSEARCH not 0
0,0,1,0,100,0,1,2,0,0.5,1,0
-oqdepth2,0-1
DEPTH 2: How strongly to force formant 2 to quantised pitch (0-1); only if PCHSEARCH not 0
0,0,1,0,100,0,1,2,0,0.5,1,0
-pqdepth3,0-1
DEPTH 3: How strongly to force formant 3 to quantised pitch (0-1); only if PCHSEARCH not 0
0,0,1,0,100,0,1,2,0,0.5,1,0
-qqdepth4,0-1
DEPTH 4: How strongly to force formant 4 to quantised pitch (0-1); only if PCHSEARCH not 0
0,0,1,0,100,0,1,2,0,0.5,1,0
-s,Use short window
OPTION: Use short time-window to extract spectral envelope (default: large window)
-f,Force fundamental
OPTION: Force lowest formant to use fundamental frequency as peak. (Not recommended with short-window option)
-r,Silence unpitched
OPTION: Replace extremely quiet or unpitched windows by silence.
-S,Smoothing
OPTION: Smooth between pitches in formant traces. 
 


